Kenwood DNX7210BT Quick Start Manual

Also see for DNX4210BT: Instruction manual Quick start guide

Contents

27DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BTRemoving the unit1) Remove the hard rubber frame byreferring to step 1 in “Removingthe hard rubber frame”.2) Insert the two removal tools(accessory3) deeply into the slotson each side, as shown.33) Lower the removal tool towardthe bottom, and pull out the unithalfway while pressing towardsthe inside.NOTE• Be careful to avoid injury from the catchpins on the removal tool.4) Pull the unit all the way out withyour hands, being careful not todrop it.Connector Function GuidePin Numbersfor ISOConnectorsCable Color FunctionsExternal PowerConnectorA-4 Yellow BatteryA-5 Blue/White Power ControlA-6 Orange/White DimmerA-7 Red Ignition (ACC)A-8 Black Earth (Ground)ConnectionSpeakerConnectorB-1 Purple Rear Right (+)B-2 Purple/Black Rear Right (–)B-3 Gray Front Right (+)B-4 Gray/Black Front Right (–)B-5 White Front Left (+)B-6 White/Black Front Left (–)B-7 Green Rear Left (+)B-8 Green/Black Rear Left (–)*Speaker Impedance: 4-8 Ω