Kenwood DNX7230BT Instruction Manual

Also see for DNX4230BT: Quick start guide Instruction manual

Contents

77Return to the Top pageSetting UpView Camera ControlYou can set up display when a CMOS-300Series view camera is used.1 Press the button for 1second.Camera view screen appears.2 Adjust each item as follows.3211 GuidelineTouching each time turns on or off theguideline display alternately.2 Switching the View CameraTouching each time changes between thefront view camera and rear view camera.3 AngleTouching each time changes camera angles inthe following order:Super wide view/ Wide view/ Overhead view/Wide view + Top view/ Corner viewNOTE• The video camera controls described abovemay not be operable depending the connectedcameras.System SetupNOTE• Each operation in this section can be started fromthe multi function menu.1 Touch [Menu] on any screen.TOP Menu screen appears.2 Touch [SETUP].3 Touch [System].System Menu screen appears.See the following section for each setting.• Set up the user interface (P.78)• Adjust touch panel (P.79)• Set up security (P.80)• Set up memory (P.81)