Kenwood DNX7340BT Installation Manual

Also see for DDX6034: Instruction manual Service manual

Contents

Kenwood DNX7340BT Installation Manual Manual pdf 11 page image

English | 11Removing the Hard Rubber Frame(escutcheon)1. Engage the catch pins on the removal tool 5 andremove the two locks on the lower level.Lower the frame and pull it forward as shown inthe figure.Accessory 5LockCatch⁄• The frame can be removed from the top side in the samemanner.2. When the lower level is removed, remove theupper two locations.Removing the Unit1. Remove the hard rubber frame by referring to theremoval procedure in the section Hard Rubber Frame>.2. Insert the two removal tools 5 deeply into theslots on each side, as shown.Accessory 53. Lower the removal tool toward the bottom, andpull out the unit halfway while pressing towardsthe inside.⁄• Be careful to avoid injury from the catch pins on theremoval tool.4. Pull the unit all the way out with your hands, beingcareful not to drop it.Removing Monitor/Player Unit

/ 12

Related manuals for Kenwood DDX6034