Kenwood DNX891HD Quick Start Manual

Also see for DNX5710BT: Firmware upgrade guide Quick start guide Instruction manual Instruction manual

Contents

English ñ 23Ñ Connecting wires to terminalsAA++++MUTEILLUMIP. CONTANT CONTSTEERING WHEELREMOTE INPUTREMOTE CONTWhite/BlackGray/BlackGreen/BlackPurple/BlackSpeaker impedance: 4-8 ΩPurpleGreenGrayWhiteTo front leftspeakerTo front rightspeakerTo rear leftspeakerTo rear rightspeakerRed (Ignition wire)Black (Ground wire) ¤(To car chassis)Yellow (Battery wire)To use the steering wheel remotecontrol feature, you need an exclusiveremote adapter (not supplied) matchedto your car.Light Blue/Yellow(Steering remote control wire)Orange/White(Dimmer control wire)Brown (Mute control wire)Blue(Antenna control wire)Blue/White(Power control wire)Connect to the terminal that isgrounded when either the telephonerings or during conversation.To use the Mute feature, you need tohook up this wire to your telephoneby using a commercial telephoneaccessory.Depending on what antenna you areusing, connect either to the controlterminal of the motor antenna, or to thepower terminal for the booster amplifierof the film-type antenna.(Max. 300mA, 12V)When using the optional poweramplifier, connect to its power controlterminal.If no connections are made,do not let the cable come out from the tab.To steering remoteTo car light control switchIgnition keyswitchCar fusebox(Main fuse)Car fuseboxACCBatteryAccessory 1Fuse (10A) Fuse (10A)