Kenwood DNX9210BT Instruction Manual

Also see for DNX9210BT: Instruction manual Quick start guide Instruction manual

7676 77Return to the Top pageSetting UpReturn to the Top pageSetting UpRegistering original colorYou can register your original color.1 Touch [Adjust] in the Panel ColorCoordinate screen.Panel Color RGB Coordinate screenappears.2 Use [2] and [3] to adjust each colorvalue.3 Touch the desired preset key for 2seconds.Panel color scanYou can set the panel color to continuouslyscan through the color spectrum.1 Touch [ON] of [Panel Color Scan] inthe Color screen.Panel Color Scan is set to on.Changing background imageYou can load an image from the connectedUSB device and set it for the backgroundimage.Before operating this procedure, it isnecessary to connect the device which hasthe image to load.1 Touch [Background] in the DisplayMenu screen.Background screen appears.2 Touch [STANDBY].3 Touch [Memory] of[User Background].User Background File Select screenappears.4 Select the image to load.5 Touch [Enter].The selected image is loaded and thedisplay returns to the Background screen.NOTE• Touching [ ] rotates counter clockwise.• Touching [ ] rotates clockwise.6 Touch [Change] of [BackgroundChange] in the Background screen.7 Select an image for background andtouch [Enter].NOTE• See Playable Media And Files (P.100) forreadable image specifications.• Touching [Delete] in the Background screendeletes the background image. After you touch[Delete], a confirmation message appears. Followthe message and complete the operation.Navigation SetupYou can set navigation parameters.1 Touch [Menu] on any screen.2 Touch [SETUP].SETUP Menu screen appears.3 Touch [Navigation].Navigation SETUP screen appears.4 Set each item as follows.NAV Interrupt SpeakerSelects speakers used for voice guidance of thenavigation system.Front L: Uses the front left side speaker forvoice guidance.Front R: Uses the front right side speaker forvoice guidance.Front All (Default): Uses both front speakersfor voice guidance.NAV Voice VolumeAdjusts the volume for voice guidance of thenavigation system. Default is “25”.NAV MuteMutes the volume of rear speakers duringvoice guidance of the navigation system.Default is “ON”.