Kenwood DP-4090 Instruction Manual

Also see for DP-4090: Service manual

Kenwood DP-4090 Instruction Manual Manual pdf 18 page image

DP-5090/4090 (En)18The following procedure allows to record a CD within thespecified tape length so that no music is interrupted in themiddle at the ends of sides A and B.EditingPreparationPress the numeric keys as shown below.30-minute tape : 000)46-minute tape : 00006÷ Recording within 99 minutes can be specified in minutes (2 digits).÷ If you commit a mistake in time entry, press the P.MODE key andrestart the procedure from the beginning.÷ By pressing the TIME DISPLAY key the set time-length intervals willchange in this order:÷ The interval length can be adjusted with the skip keys 4 and ¢ inunits of one minute (to a maximum of 99 minutes).1 Light the “EDIT” indicator.2 Enter the recording time of the tape.÷ Load a disc in the CD player.÷ Check that the unit is in the normal playTRACK mode. !: Keys and control used in the operations described on this page.REMOTE CONTROL UNITRC-P0505COMPACT DISC PLAYER DP-5090REMOTE CONTROL UNITRC-P0505DE TI C 4- 6EDITDE TI C ?- ?Blinks.TIMEDISPLAY EDITREMOTE CONTROL UNITRC-P0505REMOTE CONTROL UNITRC-P05051 2 34 5 67 8 90 +102 Set the entry.1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, orthe last track on side A or side B may be cut short.2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music.NotesNotesDo this operation in the stop mode.Go to step 2 within 8 seconds.If more than 8 seconds have elapsed,press the key again.1 Select the time.When using the numeric keys:When using the TIME DISPLAY key:"46=54=60=74=90=??"=The CD contents are edited as follows.(1) The tape recording time input is divided by two, and tracks that canbe accommodated in file A (which refers to tracks on tape side A) areselected in order of their track Nos.(2) In a few seconds, the time left on tape side A is displayed, then fileB (tracks on tape side B) is edited in the same manner.Editing in the FILE ADE TI A 01The selected track numbers are displayed in sequence.DE TI A 1- 2: 3Remaining time display.á