Kenwood DPX-5010 Instruction Manual

Also see for DPX-5010: Service manual Service manual

Kenwood DPX-5010 Instruction Manual Manual pdf 14 page image

OPEN/CLOSE button, press this button for at least three secondsto eject the CD.• Do not attempt to insert a CD into the slot if another one isalready there.• The eject function will operate even if the CD OPEN/CLOSEbutton is pressed while no CD is loaded. Attempting to quicklyinsert a CD at this time may result in scratching the CD. Wait ashort time before inserting a CD.• When the front panel has been slid, it might interfere with theshift lever or something else. If this happens, pay attention tosafety and move the shift lever or take an appropriate action,then operate the unit.• Do not apply excessive force to the front panel after it slides.• Do not use the unit with the front panel in the slid condition.Doing so will cause breakdown.When you load a CD and eject it right away, the next time you tryto insert the CD may not load. In such a situation, take the CD outfor a moment and then reinsert it.NOTE2CAUTIONPlay:Press the CD OPEN/CLOSE button to slide open the frontpanel, showing the CD (insertion) slot. Holding the CD with thelabeled side facing up, insert it in the slot. The control panel willbe shown, and the CD will start playing.The indicator will light when a CD has been inserted.Playing CDs Already Inserted:Press the SRC button repeatedly to select the CD mode."CD" is displayed when the CD mode has been selected.The CD will start playing.Pausing and Restarting CD Play:Press the 38 button to make the disc pause.Press the same button again to start play again.Eject:Press the CD OPEN/CLOSEbutton. The front panel willslide to eject the CD.Press the CD OPEN/CLOSEbutton to show the controlpanel.When the CD cannot be ejected even if you press the CDNOTEPlaying CDs When a unit equipped with an O-N switch is to be connected,please also see the instruction manual of this unit.Set the O-N switch to "N". "N"-operation will be set. When a unit that is not equipped with an O-N switch, or thechanger switching unit "KCA-S200" is connected, "O"-operation will be set.The CD text, Presetting Disc Names, and Disc Name Preset Playfunctions may not be operational depending on the unit.NOTE— 14 —English