Kenwood DPX-5010 Service Manual

Also see for DPX-5010: Instruction manual Service manual

Contents

Kenwood DPX-5010 Service Manual Manual pdf 8 page image

9PANEL MECHANISM DESCRIPTIONA. Panel Opening1. When Open button(switch) is pressed, the motor (305)rotates.2. The rotation of the motor is transmitted forward throughthe rack gear (316) via the gears (320-322)3. When the rack gear (316) moves, the panel (PA1) goesdown.4. (1) The upper side of the panel pushed on the arm as-sembly (304) by the pin (✽2) and the groove of therail (✽3).(2) The lock on the lever (A) is let go and the arm assem-bly (304) goes down.(3) When this happens, the planetary gear (303) rotates.5. When the arm assembly goes down to the open position,the switch (341) is turned on. When the switch (341) isturned on, the motor stops after 950ms.B. Closing Behavior1. The motor rotates in reverse direction.2. The arm assembly (304) goes up. When the lever (A) goesinto the lock position of the rail (312), the arm assembly(304) stops going up.3. When the arm assembly (304) stops, by the rotation ofthe planetary gear (303), the motor rotation pushes therack gear (316) backward via the gears (320-322).4. By the close position information of the LPS (342), themotor (305) stops after 200mS.C. Angle Behavior1. By the position information of the LPS (342), the panelangle is controlled.3082330932032131630230530413312 30332034130430443308A 3042 21234312304308304 309320321316303302305DPX-5010