Kenwood DPX-5100BT Instruction Manual

Also see for DPX-5100BT: Instruction manual

Contents

4 ENGLISHTo On the remote controlTurn on the power Press and hold SRC to turn off the power.( Pressing SRC does not turn on the power. )Adjust the volume Press or .• Press and hold to continuouslyincrease the volume to 15.Press ATT during playback to attenuate thesound.• Press again to cancel.Select a source Press SRC repeatedly.Remote control (RC-406) (supplied for )Pull out the insulation sheetwhen using for the first time.How to replace the batteryRemote sensor (Do not exposeto bright sunlight.): Remote control functions are not available.BASICS GETTING STARTEDSelect the display language and cancel the demonstrationWhen you turn on the power for the first time (or [FACTORY RESET] is set to[YES], 6), the display shows: “SEL LANGUAGE” “PRESS” “VOLUMEKNOB”1 Turn the volume knob to select [ENG] (English) or [TUR] (Turkish),then press the knob.[ENG] is selected for the initial setup.Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUMEKNOB”.2 Press the volume knob.[YES] is selected for the initial setup.3 Press the volume knob again.“DEMO OFF” appears.Then, the display shows the selected crossover type: “2-WAY X ’ OVER” or“3-WAY X ’ OVER”• To change the crossover type, see “Change the crossover type”. ( 6)1