Kenwood DPX-7300DAB Instruction Manual

Also see for DPX-7300DAB: Quick start guide

28 ENGLISHData Size: B6L (182 mm x 128 mm)Book Size: B6L (182 mm x 128 mm)Audio Settings[DTA SETTINGS][POSITION] Selects your listening position (reference point).[ALL]: Not compensating ; [FRONT RIGHT]: Front right seat ;[FRONT LEFT]: Front left seat ; [FRONT ALL]: Front seats• [FRONT ALL] is displayed only when [2-WAY X’OVER] is selected.(Page 6)[DISTANCE] [0CM] to [610CM]: Fine adjust the distance to compensate.(Before making an adjustment, select the speaker you want to adjust.)[GAIN] [–8DB] to [0DB]: Fine adjust the output volume of the selected speaker.(Before making an adjustment, select the speaker you want to adjust.)[DTA RESET] [YES]: Resets the settings ([DISTANCE] and [GAIN]) of the selected[POSITION] to default. ; [NO]: Cancels.[CAR SETTINGS] Identify your car type and rear speaker location in order to make theadjustment for [DTA SETTINGS].[CAR TYPE] [COMPACT]/[FULL SIZE CAR]/[WAGON]/[MINIVAN]/[SUV]/[MINIVAN(LONG)]: Selects the type of vehicle. ;[OFF]: Not compensating.[R-SP LOCATION] Selects the location of the rear speakers in your vehicle to calculate thefurthest distance from the listening position selected (reference point).• [DOOR]/[REAR DECK]: Selectable only when [CAR TYPE] is selectedas [OFF], [COMPACT], [FULL SIZE CAR], [WAGON] or [SUV].• [2ND ROW]/[3RD ROW]: Selectable only when [CAR TYPE] isselected as [MINIVAN] or [MINIVAN(LONG)].• Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS],select the speaker you want to adjust:When 2-way crossover is selected:[FRONT LEFT]/[FRONT RIGHT]/[REAR LEFT]/[REAR RIGHT]/[SUBWOOFER]– You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a settingother than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE].(Page 26)When 3-way crossover is selected:[TWEETER LEFT]/[TWEETER RIGHT]/[MID LEFT]/[MID RIGHT]/[WOOFER]– You can only select [WOOFER] if a setting other than [NONE] is selected for[WOOFER] of [SPEAKER SIZE]. (Page 27)• [R-SP LOCATION] of [CAR SETTINGS] is selectable only if:– 2-way crossover is selected. (Page 6)– A setting other than [NONE] is selected for [REAR] of [SPEAKER SIZE].(Page 26)Determining the delay time automaticallyIf you specify the distance from the currently setlistening position to every speaker, the delay time willbe automatically calculated.1 Set [POSITION] and determine the listeningposition as the reference point (the reference pointfor [FRONT ALL] will be the center between theright and left in the front seats).2 Measure the distances from the reference point tothe speakers.3 Calculate the distance between the furthest speaker(subwoofer on the illustration) and other speakers.4 Sets the [DISTANCE] calculated in step 3 forindividual speakers.5 Adjusts [GAIN] for individual speakers.Example: When [FRONT ALL] is selected as thelistening position.DPX-7300DAB_E_B5A-3899-00_EN_1st Draft.indd 28DPX-7300DAB_E_B5A-3899-00_EN_1st Draft.indd 28 8/12/2021 3:35:45 PM8/12/2021 3:35:45 PM