Kenwood DPX-M3300BT Instruction Manual

Also see for DPX-M3300BT: Quick start guide Instruction manual

ENGLISH 7[F/W UPDATE][UPDATE SYSTEM][F/W UP xxxx] [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is notactivated).For details on how to update the firmware, visit.• Once you have upgraded the firmware, you are unable to downgradethe firmware.[FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ;[NO]: Cancels.[ENGLISH] Select the display language for [FUNCTION] menu and music informationif applicable.By default, [ENGLISH] is selected.[TURKCE]Getting StartedChange the crossover type1 Press B SRC repeatedly to enter STANDBY.2 Press and hold number buttons 4 and 5 to enter crossover select.The current crossover type appears.3 Turn the volume knob to select “2WAY” or “3WAY”, then press theknob.4 Turn the volume knob to select “YES” or “NO”, then press the knob.The selected crossover type appears.• To cancel, press and hold .• To adjust the selected crossover settings, see page 21.Once you have changed the crossover type, the next time when you turn onthe power, the display shows:“2-WAY X ’ OVER” or “3-WAY X ’ OVER” “PRESS” “VOLUME KNOB”“TO CONFIRM”Press the volume knob to acknowledge in order to proceed to the nextdesired operation.CAUTIONSelect a crossover type according to how the speakers are connected.(Page 28, 29)If you select a wrong type:• The speakers may damage.• The output sound level may be extremely high or low.