Kenwood DPX-MP5070 Instruction Manual

Also see for DPX-MP5070: Service manual

Kenwood DPX-MP5070 Instruction Manual Manual pdf 10 page image

10 | EnglishGeneral featuresAudio Control1 Enter the Audio Control modePress the [AUDIO] button for at least 1second."Audio CTRL" is displayed.2 Select the Audio item for adjustmentPress the [FM] or [AM] button.Each time the button is pressed, the items thatcan be adjusted switch as shown below.3 Adjust the Audio itemPress the [4] or [¢] button.Adjustment Item Display RangeBalance "Balance" Left 15 — Right 15Fader "Fader" Rear 15 — Front 15Sub woofer level*¹ "SW Level" –15 — +15Bass boost level*² "Amp Bass" Flat/+6/ +12/ +18 (dB)Central frequency boost*² "Amp Freq" Normal/ LowLow Pass Filter*¹ "LPF" Through/120/80/50 HzVolume offset "V-Offset" –8 — ±0• *¹ You can control this item when 'Subwoofer Output'(page 10) is set to "Sub-W On".• Volume offset: Each source’s volume can be set as adifference from the basic volume.• *² Refer to the catalog or instruction manual for poweramplifiers that can be controlled from this unit.• *² For amplifiers there are the model that can be setfrom Flat to +18 dB, and the model that can be setfrom Flat to +12 dB.When an amplifier that can only be set to +12 isconnected to the unit, "Amp Bass +18" won't workcorrectly even if it's selected.4 Exit the Audio Control modePress the [AUDIO] button.Subwoofer OutputTurning the Subwoofer output ON or OFF.Press the [AM] button for at least 1 second.Each time the button is pressed Subwooferoutput switches ON or OFF.When it’s ON, "Sub-W On" is displayed.• You can control this function when 'Switching preout'(page 24) is set to "SWPRE Sub-W".SRS WOW SelectYou can play back adding gorgeous heavy bass tothe sound and making a 3D sound field.1 Enter the WOW Select modePress the [WOW] button."WOW Select" is displayed.2 Select the WOW itemPress the [WOW] button.Each time the button is pressed, the SRS WOWSelect switch as shown below:SRS WOW DisplayMoves the sound image up a notch and adjustsbass and the sound field. "Low"Moves the sound image up two notches andadjusts bass and the sound field. "High"Changes to the value set in 'SRS WOW Control'. "User"Returns to the normal sound without SRS WOW. "Off"• When operation stops for 3 seconds, the SRS WOWSelect closes.• WOW: TruBass, FOCUS and SRS 3D are all set to valuesshown below.SRS WOW SRS FOCUS SRS TruBass SRS 3DHigh High On OnLow Low On OnOff Off Off OffTEL MuteThe audio system automatically mutes when acall comes in.When a call comes in"CALL" is displayed.The audio system pauses.Listening to the audio during a callPress the [SRC] button.The "CALL" display disappears and the audiosystem comes back ON.When the call endsHang up the phone.The "CALL" display disappears and the audiosystem comes back ON.