Kenwood DPX302U Instruction Manual

Kenwood DPX302U Instruction Manual Manual pdf 15 page image

ENGLISH 15TUNE START*2 ON: All qualified music channels in the SmartFavoritewill start playback from the beginning of the song. ;OFF: Cancels.SIGNAL LEVEL NO SIGNAL/ WEAK/ GOOD/ STRONG: Shows thestrength of the current received signal.BUFFER USAGE 0% — 100% (0): Shows the memory usage forReplay buffer.SXM RESET YES: Resets stored channel and lock setting todefault. ; NO: Cancels.*1 Displayed only when [USER DEFINED] is selected.*2 Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later thatsupports SmartFavorites.SiriusXM® Radio AUDIO SETTINGSWhile listening to any source...1 Press to enter [AUDIO CONTROL] directly.2 Turn the volume knob to select an item (see the following table), then pressthe knob.3 Repeat step 2 until the desired item is selected or activated.4 Press and hold to exit.(or using RC-406)1 Press AUD to enter [AUDIO CONTROL].2 Press J / K to select an item, then press .To return to the previous setting item, press .Default: XXSUB-W LEVEL –15 to +15 (0) Adjusts the subwoofer output level.BASS LEVEL –8 to +8 (+2) Adjusts the level to memorize for each source. (Before making anadjustment, select the source you want to adjust.)MID LEVEL –8 to +8 (+1)TRE LEVEL –8 to +8 (+1)EQ PRO (This setting is stored to [USER].)BASS ADJUST BASS CTR FRQ 60HZ/ 80HZ/ 100HZ/ 200HZ: Selects the center frequency.BASS LEVEL –8 to +8 (+2): Adjusts the level.BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.MID ADJUST MID CTR FRQ 0.5KHZ/ 1.0KHZ/ 1.5KHZ/ 2.5KHZ: Selects the center frequency.MID LEVEL –8 to +8 (+1): Adjusts the level.MID Q FACTOR 0.75/ 1.00/ 1.25: Adjusts the quality factor.TRE ADJUST TRE CTR FRQ 10.0KHZ/ 12.5KHZ/ 15.0KHZ/ 17.5KHZ: Selects the centerfrequency.TRE LEVEL –8 to +8 (+1): Adjusts the level.