Kenwood DPX313 Instruction Manual

Also see for DPX303 - DPX 303 Radio: Instruction manual Instruction manual

Kenwood DPX313 Instruction Manual Manual pdf 6 page image

6 | DPX503U/DPX303/DPX313Category Item Setting Entry Setting overview Condition PageMENU “Security Set”/“Security Clear”1 sec. Sets/Resets security code 17“SRC Select” “1”*/ “2” Sets the source selection method. 27“iPod Mode”*1 “OFF”/ “ON”* When set to “ON”, allows you to select music in the mannersimilar to that of the iPod.13“AT COL CHG”*1 “OFF”/ “iPod”* When the iPod source is used, sets whether the illuminationcolor is changed by the iPod.28“Beep” “OFF”/ “ON”* Setting the operation check sound (beep sound) ON/OFF.“Clock Adjust” 1 sec. Sets the clock. — 18“Date Adjust” 1 sec. Sets the date. 18“Date Mode” 7 types 1 sec. Sets the date display mode.“SYNC” “OFF”/ “ON”* Synchronizing the RDS station time data and this unit’sclock.“DSI” “OFF”/ “ON”* A red indicator will blink on the unit after the ACC is set toOFF, warning potential thieves.“Display” “OFF”/ “ON”* Turns off the display when no operation is performed. — 27“Dimmer” “OFF”/ “ON”* Dims the display part in conjunction with the light switchof the vehicle.“ILM Dimmer” “AUTO”*/ “MNAL”/“OFF”Sets whether the illumination is dimmed in conjunctionwith the light switch of the vehicle or it is dimmedconstantly.27“ILM Effect” “OFF”/ “ON”* Sets whether the illumination color is changed inconjunction with the key operation. (To connect theBluetooth unit)“ILM MSC SYNC” “OFF”*/ “ON” Sets whether the key illumination color is changed inconjunction with the sound volume.—“ILM Color”*2 “Blue”*/ ”Red”/”Green”Sets the button illumination color.“SWPRE” “Rear”*/ “Sub-W” Sets the preout output. 27“AMP” “OFF”/ “ON”* Turns on/off the built-in amplifier. 27“Zone2” “Rear”*/ “Front” Specifies the destination of AUX input sound when the DualZone function is turned on.27“Supreme” “OFF”/ “ON”* Turns ON/OFF the Supreme function. 27“AMS Control” 1 sec. Controls the connected LX amplifier. — 18“News” “OFF”*/ “00min”– “90min”Turns ON/OFF the News Bulletin Automatic Receptionfunction and sets the news bulletin interrupt disabled time.28“Local Seek” “OFF”*/ “ON” Only stations whose reception is good are searched in autoseek tuning.“Seek Mode” “Auto1”*/ “Auto2”/“Manual”Selects the tuning mode of the radio. 28“AF” “OFF”/ “ON”* When station reception is poor, automatically switches tothe station that is broadcasting the same program over thesame RDS network.28“Regional” “OFF”/ “ON”* Sets whether to switch to the station only in the specificregion using the “AF” control.“Auto TP Seek” “OFF”/ “ON”* When traffic information station reception is poor,automatically searches for a station that can be receivedbetter.“MONO” “OFF”*/ “ON” You can reduce the noise when stereo broadcasts arereceived as monaural.“Name Set” 1 sec. Sets the disc name (DNPS)/ AUX name. 11/12Function ControlFunctions in the table below can be set up by using Function Control.