English | 11Auxiliary Input Display SettingSelects the display below when changing toAuxiliary input source.1 Select Auxiliary input display setting itemduring Menu mode (In AUX mode)Select the “Name Set” display.For how to select Function Control items, refer to (page 6).2 Enter Auxiliary input display setting modePress the Control knob for at least 1 second.The presently selected Auxiliary input display isdisplayed.3 Select the Auxiliary input displayTurn the Control knob or push it towards up ordown.“AUX”/ “DVD”/ “PORTABLE”/ “GAME”/ “VIDEO”/ “TV”4 Exit Auxiliary input display setting modePress the [FNC] button.⁄• When operation stops for 10 seconds, the name at thattime is registered, and the Auxiliary input display settingmode closes.• The Auxiliary input display can be set only when thebuilt-in auxiliary input or the auxiliary input of optionalKCA-S220A is used. On the KCA-S220A, “AUX EXT” isdisplayed by default.Function of DPX503Illumination Color Preset MemorySaving the combination of the Illumination Colorsselected for each place. The memory cannot beerased by the Reset button.1 Set the Illumination Color for each placeRefer to (page 10).2 Enter Illumination Color Preset Memory modeSelect “COLOR” > “PRESET” > “MEMO”.For how to select Function Control item, refer to (page 6).3 Put the Illumination Color Preset in thememoryPress the Control knob.“Memory?” is displayed.4 Turn the Control knob to select “YES”, and thenpress the Control knob.“Memory Completed” is displayed.5 Exit Illumination Color Preset modePress the [FNC] button.⁄• Register 1 pair of Illumination Color Preset Memory.• If you press the Reset button, the value in the memorywill be default setting value of “Illumination ColorSelection.”Function of DPX503Illumination Color Preset RecallRecalling the selection you saved in IlluminationColor Preset mode.1 Enter Audio Preset Recall modeSelect “COLOR” > “PRESET” > “RECALL”.For how to select Function Control item, refer to (page 6).2 Recall the Illumination Color PresetPress the Control knob.“Recall?” is displayed.3 Turn the Control knob to select “YES”, and thenpress the Control knob.“Recall Completed” is displayed.4 Exit Illumination Color Preset Recall modePress the [FNC] button.⁄• When you recall Illumination Color Preset, the currentIllumination Color settings will be replaced with thepreset selection.
