Kenwood DPX701 DPX501 Instruction Manual

Also see for DPX501: Service manual Instruction manual

48 | EnglishMenu systemOther than Standby modeAudio Preset RecallRecalling the sound setup registered by Preset Memory> (page 47).1 Select the sourcePress the [SRC] button.2 Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.3 Select Audio Preset modePush the Control knob towards [FM] or [AM].Select the "Audio Preset"/ "A-PRESET" display.4 Enter Audio Preset modePress the Control knob for at least 1 second.5 Select the Audio Preset RecallPush the Control knob towards [FM] or [AM].Select the "Recall"/"RECALL" display.6 Recall the Audio PresetPress the Control knob for at least 2 seconds.The "Recall"/"RECALL" display blinks 1 time.7 Exit Audio Preset modePress the [MENU] button.• The User memory of (page 12) ischanged to the value which was recalled.• The source tone memory item of

(page 12) is changed to the value which was recalledby the selected source.In Standby modeDemonstration mode SettingSets the demonstration mode.1 Select the Demonstration modePush the Control knob towards [FM] or [AM].Select the "DEMO Mode"/ "DEMO" display.2 Set the Demonstration modePress the Control knob for at least 2 seconds.Each time you press the knob at least 2 seconds,the Demonstration mode alternates between thesettings shown in the table below.Display Setting"DEMO Mode : ON"/"DEMO ON"The Demonstration mode function is ON."DEMO Mode : OFF"/"DEMO OFF"Exit Demonstration mode (Normal mode).