Kenwood DPX792BH Instruction Manual

Also see for DPX502BT: Instruction manual

ENGLISH 33Do the required wiring.( 34)Dashboard of your carBend the appropriate tabs to hold themounting sleeve firmly in place.Installing the unit (in-dash mounting) When installing without the mounting sleeve1 Remove the mounting sleeve and trim platefrom the unit.2 Align the holes in the unit (on both sides)with the vehicle mounting bracket and securethe unit with screws (supplied/ commerciallyavailable).How to remove the unitInsert the extraction keys deeply into the slots oneach side, then follow the arrows as shown below.Do the required wiring.( 34)Dashboard of your carCar bracketInstalling in Toyota cars (except for )Install onto the car brackets using screws (F) or (G) (supplied/ commercially available). Use the mounting holes( ) or ( ) that fit the car brackets. Then, install the supplied trim plate (C).Use only the specified screws.Using wrong screws might damagethe unit.