Kenwood DV-402 Instruction Manual

Also see for DV-402: Service manual Service manual

Kenwood DV-402 Instruction Manual Manual pdf 17 page image

17OperationsDVF-3530 / DV-402Playback of discBasic playPreparation÷ set the POWER ON/OFF switch to the ON ( )position.÷ When the POWER ON/OFF switch of the main unitis left ON at all times, the power can be switched onand off with the remote control unit.POWER07 6ON/STANDBY keyPOWER ON/ OFF switchPLAY (3) keyPAUSE (8) keySTOP (7) keyPOWER ( ) key7 (STOP) keyOPEN/CLOSE (0) key0 (open/close) key6 (PLAY/PAUSE) keyPOWERON OFFLoad a disc1MAIN UNIT REMOTE01 Open the tray.2 Place a disc3 Close the trayON/STANDBYPOWER074¢1¡6Label side÷ When the key is pressed, turns power automatically ON.Then the tray opens.When the key is pressed again, the tray closes. When thePLAY/PAUSE (PLAY) key is pressed while a tray is open,the tray closes automatically, and then playback begins.Start playback2MAIN UNIT REMOTE6 TITLE No. (DVD)CHAPTER No. (DVD)TRACK No. (CD)Time displayTo stop playbackMAIN UNIT REMOTE7When a Disc Menu appears on the screenIn case of interactive DVDs, a Disc Menu appears on the screen.Then press ENTER to select specific menu you want to play by usingCursor keys.ON/STANDBY÷ If a disc has already been loaded in the trayand the power is OFF, simply pressing thePLAY/PAUSE (PLAY) key turns power auto-matically ON and starts playback.÷ Each press pauses and plays the disc alter-natelyRESUME playbackWhen a menu screen is recorded on thedisc, the menu screen will be displayedwhen the TOP MENU key is pressed. Atthe menu screen, the menu can be se-lected by pressing the Cursor keys.When the STOP key has been pressed once duringplayback to stop the playback, and then playback isstarted again, play will start from the point wherethe playback had been stopped. This is called theRESUME function. When the STOP key is pressedagain during stop, the RESUME function is can-celled.TOP MENURESUME is cancelled when 5 minutes have passed inRESUME status.