Kenwood DVF-3300 Instruction Manual

Also see for DVF-3300: Instruction manual

Preparations17 ENLANGUAGEMenu LanguageSelect a language for the Setup menu and on-screendisplay.Disc Audio/ Disc Subtitle/ Disc MenuSelect the language you prefer for the audio Track (discaudio), subtitles, and the disc menuOriginal: Refers to the original language in which thedisc was recorded.Other: To select another language, press numeric keysthen ENTER key to enter the corresponding digit num-ber according to the language code list in the referencechapter. If You enter the wrong Language code, pressCLEAR key. ¡DISPLAYTV Aspect4:3: Select when a standard 4:3 TV is connected.16:9: Select when a 16:9 wide TV is connected.Display ModeDisplay Mode setting works only when the TV Aspectmode is set to "4:3".Letterbox: Displays a wide picture with bands on theupper and lower portions of the screen.Panscan: Automatically displays the wide Picture on theentire screen and cuts off the portions that do not fit.Progressive ScanIf you are using the COMPONENT VIDEO jacks, but areconnecting the DVD Player to a standard (analog) televi-sion, set Progressive Scan to Off.If you are using the COMPONENT VIDEO jacks forconnection to a TV or monitor that is compatible with aprogressive scan signal, set Progressive Scan to On.Once the setting for progressive scan output is entered,an image will only be visible on a progressive scan com-patible TV or monitor. If you set Progressive Scan to Onin error, you must reset the unit.1 Press 7 (stop) key to stop any disc that is playing.2 Press 7 (stop) key again for more than 5 seconds.The video output will be restored to the standard setting,and a picture will once again be visible on a conventionalanalog TV or monitor.TV Output Select (only for Europe)Set the player's TV Output Select options according tothe TV connection type.RGB: When your TV is connected with the SCART jack.Y C B C R: When your TV is connected with the COMPO-NENT VIDEO jacks on the DVD player.Set Up functionsNoteNote