Kenwood DVF-R9050 User Manual

Also see for DVF-R9050: Service manual Service manual

Contents

OSD Operation35Chapter 4: OSD Operation"SOUND" OSD OperationThis section describes the items which can be controlledwith the "SOUND" OSD. (Some items may beuncontrollable depending on the played disc and playerstatus.)SOUND Off OffENG 5.1ch1 DolbyE X I TOff21 3 41 Audio icon: Shows the audio signal, audio languageand number of audio channels. Select to switch theaudio language. fi2 Virtual Surround icon: Shows the level of the Vir-tual Surround effect. Select to adjust the level of Vir-tual Surround or switch it off.fi3 Cinema voice icon: Shows the on/off status of Cin-ema Voice. Select to switch Cinema Voice on or off.fi4 Down Mix icon: Shows the on/off status of Downmix. Select to switch Down mix on or off.flSwitching the audio languageWhen a VCD or a DVD containing the recording of audioin multiple languages is played, the language used in thevoice can be switched over. (The audio language can alsobe switched directly by pressing the AUDIO button. •)1. Press ON SCREENduring DVD playback and select the"SOUND" OSD by tilting the joystick up or down.2. Move the cursor to ENG 5.1ch1 Dolby(Audio icon)by tilting the joystick to the left or right, then pressENTER .Virtual Surround functionWhen playing a DVD recorded with Dolby DigitalSurround audio, powerful sound can be reproduced evenwhen you use headphones or only two speakers.1. Press ON SCREEN during DVD playback, and select the"SOUND" OSD by tilting the joystick up or down.2. Move the cursor to Off (Virtual Surround icon)by tilting the joystick to the left or right, then pressENTER .¶ The icon can be selected only when the playedsoftware is recorded in Dolby Digital audio (with2 or more channels).3. Select the level of Virtual Surround effect by tiltingthe joystick up or down, then press ENTER .3. Select the desired audio language number by tilting thejoystick up or down, then press ENTER .¶ With a DVD AUDIO disc, an audio languagenumber can be selected from up to 2 numbers.¶ With a DVD VIDEO disc, an audio languagenumber can be selected from up to 8 numbers.¶ With VCD, "STEREO", "L", "R" or "L+R" can beselected.¶ The default audio language set by the user isselected when the power is turned on or the disc ischanged. If the default language is not containedin the disc, the priority language defined for thedisc will be played back.Off12HP1HP2¶ When a DVD recorded with Dolby Digital audio(with 2 or more channels) is played, the "DOLBYDIGITAL" indicator on the player main unit lightsup.The effect is increased when theselected level is higher. Select "Off"to switch the effect Off. To selectthe level of the Virtual Surroundeffect through headphones, select"HP1" or "HP2".Cinema Voice functionThis function to be used when words are hard to bedistinguished during playback of DVD recorded withDolby Digital Surround, Dolby Digital, DTS, or DVDAudio LPCM. To use this function, it is required that thedisc being played provides the center channel audio.÷ When the digital output terminal is used, the“Digital Audio” setting should be set to “PCM”or “Off”. R1. Press ON SCREENduring playback of DVD, then select the"SOUND" OSD by tilting the joystick up or down.2. Move the cursor to Off (Cinema Voice icon) bytilting the joystick to the left or right, then press ENTER .¶ The icon can be selected only when the played softwareis recorded in Dolby Digital audio (with center channel).3. Select on or off by tilting the joystick up or down,then press ENTER .