Kenwood DVR-6200 Service Manual

Also see for DVR-6200: Service manual

Contents

Caution on condensationBefore transporting or moving this unit, carry out thefollowing operations.1.Set the POWER ON/OFF switch to theONwithout loading a disc.2. Wait a few seconds and verify that the displayshown appears.3. Set the POWER ON/OFF switch to OFF.Note related to transportation and movementCondensation (of dew) may occur inside the unit when there is a greatdifference in temperature between this unit and the outside. This unitmay not function properly if condensation occurs. In this case, leavethe unit for a few hours and restart the operation after the condensa-tion has dried up.Be specially cautious against condensation in the following circum-stances:When this unit is carried from one place to another across a largedifference in temperature, when the humidity in the room wher ethis unit is installed increases, etc.System SpeakersDVR-6200 KSW-6200 (Left speaker, right speaker, center speaker, surround speakers and subwoofer)Speaker model namesThe marking of products using lasers(For countries other than U.S.A. and U.S.-Military)Inside this laser product, a laser diode classified as Class 2 laser radia-tion is contained as alerted by the internal caution label shown above. Donot stare into beam or view directly with optical instruments.Location: DVD laser pick-up unit cover inside this productCAUTIONVISIBLE AND INVISIBLE LASER RADIATIONWHEN OPEN. DO NOT STARE INTO THE BEAM ORVIEW DIRECTLY WITH OPTICAL INSTRUMENTS.DO NOT PRESS ON THIS SURFACEThe marking this product has been classified as Class 1. Itmeans that there is no danger of hazardous radiation outsidethe product.Location: Back panelCLASS 1LASER PRODUCTManufactured under license from Dolby Laboratories.“DOLBY”, “Pro Logic” and the double-D symbol aretrademarks of Dolby Laboratories.“DTS” and “DTS Digital Surround” are trademarks ofDigital Theater Systems, Inc.Operation to reset 1 Press the MENU key on the remote to enter SETUPMENU .2 Select the PREFERENCE, then press the ENTER key.3 Select DEFAULTS, press the Cursoe right (3) key toselect RESET.4 Press the numeric keys as shown below.Press 1 , 3 , 9 , 7 , then press the ENTER key.When resetting is done according to this method, all set-tings, including the settings for password and parental level ,will be reset to the factory defaults .The microprocessor may fall into malfunction (impos-sibility to operate erroneous display, etc.) w hen thepower cord is unplugged while power is ON or due toan external factor.In this case, switch off the power, wait for several sec-onds, and then switch the power on again.Return to the factory defaults by resetting the micropro-cessor is done as shown as follows.FM indoor antenna (1)(T90-0882-08): MEX(T90-0907-08): KLoop antenna (1)(T90-0896-08)Remote control unit (1)(A70-1647-08): KXM(A70-1648-08): EBatteries (R6/AA) (2)Video cord (1)(E30-1427-05)SCART plug adaptor (1)(Europe only)(E69-0012-05)Speaker cords (6)(E30-5480-08): RD(E30-5962-08): WH(E30-7005-05): VT(E30-5482-08): GN(E30-5483-08): GY(E30-5963-08): BLDVR-62002ACCESSORIES / CAUTIONSAccessoriesCautionsSYSTEM MAIN UNIT SPEAKERDVT-6200 DVR-6200 KSW-6200SYSTEM CONFIGURATION