KENWOOD PROTALK® TK-2200/TK-3200 FIELD CLONING INSTRUCTIONSSTEP 1: Using either the RMS Radio Management Software or field setup modes described in theInstruction Manual (page 17 for basic channel setup), program the MASTER radio to the desiredfrequencies, private codes and other features.STEP 2: Gather the SLAVE radios to be cloned. There is no limit to the number of radios thatcan be cloned at one time as long as they are within transmission range of the MASTER. Notethat the SLAVE radio(s) and the MASTER radio must be the exact same model.STEP 3: Turn off the SLAVE radio(s). Hold down both the PTT and PF2 buttons while turning theSLAVE radio(s) back on. Hold both buttons until the radio announces"Clone" with the LED turning to a steady orange. This will put theSLAVE radio(s) in CLONE MODE.STEP 4: Turn off the MASTER radio. Hold down both the PTT andPF2 buttons while turning the MASTER radio back on. Hold bothbuttons until the radio announces "Clone" with the LED turning to asteady orange. This will put the MASTER radio in CLONE MODE.STEP 5: Push and release the PTT button on the MASTER radio tostart the CLONE process. During the cloning, the LED on the MASTERradio will be flashing red and the LED on the SLAVE radio(s) will bea steady green. The cloning will take less than 1 minute with theMASTER LED changing to orange and the SLAVE LED(s) going off oncecomplete. Turn the MASTER off and back on before regular use.That's it! Clone any number of radios with no expensive hardwareneeded to get the job done...PTT (Push-To-Talk) +PF1 (Push Function 1) +PF2 (Push Function 2) +MASTER RADIOSLAVE RADIO(S) - ANY NUMBER CAN BE CLONED AT THE SAME TIMEK E N W O O D C O M M U N I C A T I O N SKENWOOD MASTER PROTALK DISTRIBUTORe Commerce Supply15375 Barranca Pkwy H108Irvine, CA 92618-2209949-502-5588 949-480-0039 FAXwww.ecom-supply.comradios@ecom-supply.com© Copyright 2006 e Commerce Supply Page 7