Kenwood FleetSync TK-5710(H) Specifications
Also see for FleetSync TK-5810(H): Instruction manualService manualService manualInstruction manual
Contents |
■ KMC-9BDesktop Microphone■ KMC-27Microphone(MIL-SPEC noise-canceling)■ KMC-28Keypad Microphone(MIL-SPEC noise-canceling)■ KCT-18Ignition Sense Cable■ KCT-22Remote Control Cable■ KCT-23DC Power Cable■ KES-5External Speaker (20W)■ KCH-14Basic RemoteControl Head■ KCH-15Full-Featured RemoteControl Head■ KRK-5Single Control Head Remote Kit■ KRK-6DHDual Control Head Remote Kit■ KPG-94Keyloader Interface Cable■ VGS-1Voice Guide & Storage UnitApplicable MIL-STD & IPADS#43807 Printed in USAJQA-QMA1205All accessories and options may not be available in all markets.Contact an authorized Kenwood dealer for details and completelist of all accessories and options.Options SpecificationsModel TK-5710 TK-5710H TK-5810 TK-5810HGENERALFrequency RangeType 1 136-174 MHz 450-520 MHzType 2 400-470 MHzNumber of Channels 512Zones 50Max. Channels per Zone 250Channel SpacingAnalog 12.5 / 15 / 20 / 25 / 30 kHz 12.5 / 25 kHzDigital 12.5 kHzOperating Voltage 13.6V DC ± 15% 13.4V DC ± 15% 13.6V DC ± 15% 13.4V DC ± 15%Current DrainStandby Less than 0.6AReceive Less than 2.3ATransmit Less than 12A Less than 25A Less than 14A Less than 28ADuty Cycle Transmit: 20%Operating Temperature Range -22 ˚F to +140 ˚F (-30 ˚C to +60 ºC)Frequency Stability ± 2.0 ppm (-22 ˚F to +140 ˚F)Antenna Impedance 50 ΩDimensions (W x H x D)RF Deck only 7.01 x 2.36 x 7.68 in. 7.01 x 2.36 x 12.87 in. 7.01 x 2.36 x 7.68 in. 7.01 x 2.36 x 12.87 in.(178 x 60 x 195 mm) (178 x 60 x 327 mm) (178 x 60 x 195 mm) (178 x 60 x 327 mm)with KCH-14 or15 7.05 x 2.36 x 9.09 in. 7.05 x 2.36 x 14.29 in. 7.05 x 2.36 x 9.09 in. 7.05 x 2.36 x 14.29 in.(179 x 60 x 231 mm) (179 x 60 x 363 mm) (179 x 60 x 231 mm) (179 x 60 x 363 mm)Weight RF Deck only 5.3 lbs. (2.4 kg) 8.6 lbs. (3.9 kg) 5.5 lbs. (2.5 kg) 9.2 lbs. (4.2 kg)with KCH-14 5.9 lbs. (2.7 kg) 9.2 lbs. (4.2 kg) 6.2 lbs. (2.8 kg) 9.9 lbs. (4.5 kg)with KCH-15 5.9 lbs. (2.7 kg) 9.2 lbs. (4.2 kg) 6.2 lbs. (2.8 kg) 9.9 lbs. (4.5 kg)FCC IDType 1 K4435753110 K4435753210 K4439923110 K4439923210Type 2 K4439923120 K4439923220IC CertificationType 1 282F-35753110Type 2 282F-39923120RECEIVER (Measurements made per EIA/TIA-204-D)SensitivityDigital (5% BER) 0.25 μVDigital (1% BER) 0.40 μVAnalog 12 dB SINAD 0.25 μVSelectivityDigital -63 dBAnalog @ 25/30 kHz -83 dB / -85 dB -83 dB / -Analog @12.5/15 kHz -76 dB / -80 dB -76 dB / -Intermodulation Distortion (Digital & Analog) -80 dBSpurious Response (Digital & Analog) -90 dBAudio DistortionDigital Less than 1.0%Analog Less than 2.0%Audio OutputInternal (KCH-14) @3% 1.5 W at 8 Ω@5% 1.625 W at 8 ΩExternal @3% 12 W at 4 Ω@5% 13 W at 4 ΩTRANSMITTER (Measurements made per EIA/TIA-152-C)RF Output Power 50 W to 5 W 110 W to 50 W 45 W to 5 W 100 W to 50 W *2Spurious & Harmonics 80 dBFM Hum & NoiseAnalog @ 25 kHz 50 (53) *1 dB 50 dBAnalog @12.5 kHz 45 (47) *1 dB 45 dBMicrophone Impedance 600 ΩAudio Distortion Less than 2%Modulation 16K0F3E, 11K0F3E, 8K10F1E, 8K10F1D20K0F7D, 11K2F7D, 14K4F1D, 7K20F1D8ft./17ft./25ft.footnotes from Front:1 Intercom: Dual Head capable remote mounts only.2 KCT-18 ignition sense cable option required.3 DB-25 ACC: I/O's for dispatch consoles, desktop remotes, vehicleintercom/PA units, motorcycle PTT/headset kits, PC Laptop /DataModems, GPS/AVL Modems; DB-25 (9 Prog. AUX I/O's & 2 Prog.AUX Outputs); 1 Prog Input (on Control Head).4 KPG-95D Software required (Windows 98/ NT/ 2000/ Me/XPcompatible).5 Easy Option Ports: VGS-1, ANI & Scrambler board ports; only 2ports can be used simultaneously.6 P25 Trunking option required.7 Two-Tone: Decode (4 sets x 4 pairs each); Encode: 32 pairs;Operator Selectable Tone (40 QT.DQT code pairs).8 DTMF Encode: PTT ID, Emergency ANI, Manual Encode (KMC-28),Auto-Dial (9 numbers); DTMF Decode: Primary/secondary ID, Stun(a.k.a. dead beat disable).9 Operates for 2-Tone, DTMF, FleetSync selective calling.10 FleetSync & FleetSync II are not compatible.11 Feature/Option added to the TK-5710 Version 2 radios (SN80600001 or later).12 KPG-94 adapts the Motorola‚ KVL3000/3000 Plus Key Loader tothe TK-5710/5810.(*1) 148MHz ~ 168MHz(*2) Type 1: 100W to 50W for 450-500MHz. More than 60W to 50Wfor 500-520MHz.Type 2: 100W to 50W for 400-470MHz.Analog measurements made per TIA/EIA 603Digital measurements made per TIA/EIA 102CAAAFleetSync® is a registered trademark of Kenwood Corporation.Windows® is a registered trademark of Microsoft Corporation in the United Statesand other countries.IMBE TM is a trademark of Digital Voice Systems Inc.The P25 Logo is used under license and is a registered trademark of the Project 25Technology Interest Group.Kenwood follows a policy of continuous advancement in development.For this reason specifications may be changed without notice.Standard MIL 810C MIL 810D MIL 810E MIL 810FMethods/Procedures Methods/Procedures Methods/Procedures Methods/ProceduresLow Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, IIHigh Temperature 501.1/Procedure I, II 501.2/Procedure I, II Cat.A1 501.3/Procedure I, II Cat.A1 501.4/Procedure I, IILow Temperature 502.1/Procedure I 502.2/Procedure I, II Cat.C1 502.3/Procedure I, II Cat.C1 502.4/Procedure I, IITemperature Shock 503.1/Procedure I 503.2/Procedure I Cat.A1,C1 503.3/Procedure I Cat.A1,C1 503.4/Procedure I, IISolar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure IRain 506.1/Procedure I, II 506.2/Procedure I,II 506.3/Procedure I, II 506.4/Procedure I, IIIHumidity 507.1/Procedure II 507.2/Procedure II 507.3/Procedure II 507.4Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4Dust 510.1/Procedure I 510.2/Procedure I, II 510.3/Procedure I 510.4/Procedure I, IIIVibration 514.2/Procedure VIII, X 514.3/Procedure I Cat.8,II Cat.3 514.4/Procedure I Cat.8,II Cat.3 514.5/Procedure I Cat.20,II Cat.5Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V, VI 516.4/Procedure I, IV, V, VI 516.5/Procedure I, IV, V, VIInternational Protection StandardDust & Water Protection IP54 |
Related manuals for Kenwood FleetSync TK-5810(H)
Kenwood FleetSync TK-690 Specifications
Kenwood FleetSync TK-980 Specifications
Kenwood FleetSync TK-8102H Specification
Kenwood TK-7100 Specifications
Kenwood TK-7100 Specifications
Kenwood TK-690 Specifications
Kenwood TK-7360 Specifications
Kenwood TK-7180H Specification
Kenwood NEXEDGE NX-800 Specifications
Kenwood NEXEDGE NX-700H Specifications
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine