Kenwood HM-335 Instruction Manual

Also see for HM-335: Instruction manual

Kenwood HM-335 Instruction Manual Manual pdf 26 page image

Recording on TAPE26 EN1.Load a tape in deck.2.Select the tape transport direction.1 Press the TAPE 2 3 key.2 Stop playback.To reverse the transport direction :÷ When recording is started, the tape is transported in the direction se-lected in this step.Check the tape transport direction indicator. *÷ Search the position you want to start recording in advance.Start recording/ Pause the recordingStop the recordingRecording on TAPEDo not use a cassette with more than 90-minute recording time, for thetape used with such a cassette is very thin and tends to cause troublessuch as entanglement around the pinch roller or cutting off tape.The tape deck of the unit can record signals only on Normal (Type ) tapes. It cannot record on High (Type ) andMetal (Type ) tapes.0 push openTAPE÷ When there is a tape slack, wind the tape before loading. rStop the recording1 Press the area marked 0 push open to open the cassetteholder.2 Insert a tape.3 Press the area marked 0 push open to close the cassetteholder.0 push open