Kenwood K25MMS14 Instruction Manual

Kenwood K25MMS14 Instruction Manual Manual pdf 9 page image

92. Choose a flat, stable work surface for yourmicrowave away from heat sources suchas radiators or fires and away from coldareas. The surface should be at least 85cmabove the floor. You should allow a 20 cmspace all around the microwave and 30 cmabove so that warm air can escape fromthe vents during cooking. This microwaveis not designed to be built in. Do not blockany intake or outlet openings as this candamage the unit.3. Plug your microwave into a standardhousehold electrical socket (230-240V~,13 amp rated). Avoid using a socket thatalso has an adapter and other equipmentplugged in. Do not use a multi-adapter.4. Put the turntable support inside themicrowave and place the glass turntableplate on top of the support. The turntablesupport is shaped to sit securely on thespindle. You must always use the turntableplate and support whenever you use themicrowave.getting readyThis microwave is designed for home use only. It should not be used for commercial catering.1. After unpacking your microwave, check that it has not been damaged whilst in the box. Makesure there are no dents, and the door closes properly. A damaged microwave could allowmicrowave energy to escape. Make sure that you have taken out all the packaging from theinside of the microwave. Please dispose of the plastic wrappings / bags safely and keep out ofthe reach of babies and young children.30cm20cm 20cm5. To protect your work surface, werecommend that you fix some non-slipcushion buttons (not included) to theunderside of the microwave.Underside View• Remove the turntable plate andturntable support before turning themicrowave upside down.• Do not remove the unit’s feet.