Kenwood KAC-6402 Instruction Manual

Contents

English 11LRLRLCCLRLRLCCAB321■ Tri-modeCENTER UNIT (High pass) Subwoofer(L + R) (Bridged)● Principle of Tri-modeMethod of frequency band division using a coil and capacitor…in case of 6dB/oct. slopeL C0 dB-3 dBCoil (L): Passes low frequencies and blocks high frequencies.(Low pass)Capacitor (C): Passes high frequencies and blocks lowfrequencies. (High pass)Crossover FrequencyFrequency159000C= (μF)fc x R159 x RL= (mH)fcfc=Cut of Frequency (Hz)R=Speaker Impedance (Ω)● Example:When it is required to set a crossover frequency of 120 Hz using speakers with an impedance of 4ohms.Prepare commercially-available coil and capacitor with the closest ratings to the results calculated from theformula above. The capacitor rating should be as close as possible to 331.25 (μF) and the coil rating shouldbe as close as possible to 5.3 (mH).2CAUTION• If you wish to bridge-connect a speaker, the speaker impedance must be no less than 4ohms. Connecting a speaker with an impedance lower than 4 ohms may damage the unit.• Be sure to connect capacitors to speakers to which high frequencies will be passed. Failure to do so willresult in a drop of the combined impedance with the subwoofer.• Ensure that the withstand voltage and current ratings of the capacitors (C) and coils (L) are sufficient.