Troubleshooting GuideWhat might appear to be 0 malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the followingtable for possible problems.cables.to .use lower volume.cord and fixing the cause of the short,not set to the correctconnected with wrong (±J 1(3 polarity. • Connect them properly checking the (±J I of the terminalsand well.wire pinched by screw in the body. • Connect the speaker wire again so that it is not pinched by• Input (or output) cables disconnected.• Protection circuit may be activated.• Volume too• The·AThe sound quality is bad.(The sound is distorted.)(Blown fuse.)The output level is too small(or too lar e.The Remote Controller doesnot function.2PecificationsSpecifications subject to change without notice.CEA-2006RMS WattsSignal toRated........................................................................................................................................................................... :JvvWx 1dBA200W......................................................................................................................................................................................... LlIVW xl,IJ) "tvvW X 1400W 1....................................................................................................................................................................................... ..JcJVW xllIJ) vvvW x 1600W xlGeneral............................................................................................................................................................................................. ..J 8 x x 286 mm12-1/2 x 2-9/16 xl H/4 inch......................................................................................................................................................................................................................................................... ..J • ..J kg (7.72 Ibs)English 7 |
