Kenwood KDC-1023 Instruction Manual

Contents

Kenwood KDC-1023 Instruction Manual Manual pdf 16 page image

English— 16 —— 16 —P.CONTANT.CONT.FRONT • LFRONT • RREAR • LREAR • R–+REARLRFM/AM antenna input 1Rear left output (White) 23Rear right output (Red) 28Fuse (10A) 242 KENWOOD disc changer control input (KDC-4023/3023/2023 only)Wiring harness(Accessory1)2529White/Black32Gray/Black35Green/Black38Purple/BlackWhite31Gray34Green37Purple40To front leftspeaker 30To front rightspeaker 33To rear rightspeaker 39To rear leftspeaker 36Ignition wire (Red) 20Battery wire (Yellow) 21Ground wire (Black) · (To car chassis) 22Ignition keyswitch10Car fuse box(Main fuse)11ACC 13Car fusebox 14Battery 12If no connections are made, do not let the wire come out from the tab.4Front left output (White) (KDC-4023 only) 26Front right output (Red) (KDC-4023 only) 27To connect the Disc changer, consult yourDisc changer manual. 3Power control wire (Blue/White) 15Motor antenna control wire (Blue)175 When using the optional power amplifier,connect to its power control terminal.7 Depending on what antenna you are using,connect either to the control terminal of themotor antenna, or to the power terminal forthe booster amplifier of the film-type antenna.Connecting Wires to Terminals