Kenwood KDC-1028 Instruction Manual

Also see for KDC-1028: Service manual Service manual Service manual

Kenwood KDC-1028 Instruction Manual Manual pdf 13 page image

English | 13Station Preset MemoryPutting the station in the memory.1 Select the bandPush the Control knob to [FM] or [AM].2 Select the frequency to put in the memoryPush the Control knob to [4] or [¢].3 Put the frequency in the memoryPress the desired [1] — [6] button for at least2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in thememory on each [1] — [6] button.Auto Memory EntryPutting stations with good reception in thememory automatically.1 Select the band for Auto Memory EntryPush the control knob to [FM] or [AM].2 Open Auto Memory EntryPress the Control knob for at least 2 seconds.When 6 stations that can be received are put inthe memory Auto Memory Entry closes.Preset TuningCalling up the stations in the memory.1 Select the bandPush the Control knob to [FM] or [AM].2 Call up the stationPress the desired [1] — [6] button.CRSC (Clean Reception SystemCircuit)Temporarily have reception switched fromstereo to mono to reduce multi-path noise whenlistening to the FM station.Press the [CRSC] button for at least 1 second.Each time the button is pressed, CRSC turns ONand OFF.When it’s ON, "on CRSC" is displayed.