Kenwood KDC-108 Instruction Manual

Also see for KDC-108: Brochure & specs Instruction manual

Contents

Basic operationsLoading slotRemote sensor• Do not expose to bright sunlight.Volume knobDetaches the faceplateThe following indicator lights up when ...ST: A stereo broadcast is received (FM).IN: A disc is in the unit.Display windowEjects the discAuxiliary input jackMaintenanceCleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure toobserve this precaution may result in damage to the monitor or unit.Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use acotton swab or cloth.Handling discs• Do not touch the recording surface of the disc.• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.• Do not use any accessories for the disc.• Clean from the center of the disc and move outward.• Clean the disc with a dry silicon or soft cloth. Do not use any solvents.• When removing discs from this unit, pull them out horizontally.• Remove the rims from the center hole and disc edge before inserting a disc.4