Kenwood KDC-122 Instruction Manual

Kenwood KDC-122 Instruction Manual Manual pdf 10 page image

Calling up the stations in the memory.1 Select the bandPress the [FM] or [AM] button.2 Call up the stationPress the [#1] — [#6] button.Preset TuningPutting stations with good reception in the memoryautomatically.1 Select the band for Auto Memory EntryPress the [FM] or [AM] button.2 Open Auto Memory EntryPress the [AME] button for at least 2 seconds.When 6 stations that can be received are put in the memoryAuto Memory Entry closes.Auto Memory Entry1 Select the bandPress the [FM] or [AM] button.2 Select the frequency to put in the memoryPress the [4] or [¢] button.3 Put the frequency in the memoryPress the [#1] — [#6] button for at least 2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in the memory on each [#1]— [#6] button.Putting the station in the memory.Station Preset MemorySelecting the station.1 Select tuner sourcePress the [SRC] button.Select the "TUnE" display.2 Select the bandPress the [FM] or [AM] button.Each time the [FM] button is pressed it switches between theFM1, FM2, and FM3 bands.3 Tune up or down bandPress the [4] or [¢] button.During reception of stereo stations the "ST" indicator is ON.TuningChoose the tuning mode.Press the [AUTO] button.Each time the button is pressed the Tuning mode switches asshown below.Tuning mode Display OperationAuto seek "AUTO 1" Automatic search for a station.indicatorPreset station "AUTO 2" Search in order of the stationsseek indicator in the Preset memory.Manual — Normal manual tuning control.Tuning ModeTuner features— 10 —English