Kenwood KDC-133 Instruction Manual

Contents

Kenwood KDC-133 Instruction Manual Manual pdf 7 page image

English | 7Clock DisplayPress the [CLK] button.Each time you press the button, the clock displayturns ON and OFF.Adjusting Clock1 Enter StandbyPress the [SRC] button.Select the "STBY" display.2 Select the clock displayPress the [CLK] button.3 Enter clock adjustment modePress the [CLK] button for at least 2 seconds.The clock display blinks.4 Adjust the hoursPush the Control knob towards [FM] or [AM].Adjust the minutesPush the Control knob towards [4] or[¢].5 Exit clock adjustment modePress the [CLK] button.Theft Deterrent FaceplateThe faceplate of the unit can be detached andtaken with you, helping to deter theft.Removing the FaceplatePress the Release button.The faceplate unlocks, allowing you to detach it.• The faceplate is a precision piece of equipment andcan be damaged by shocks or jolts.• Do not expose the faceplate to direct sunlight orexcessive heat or humidity. Also avoid places with toomuch dust or the possibility of water splashing.Reattaching the Faceplate1 Align the projections on the unit with thegrooves on the faceplate.ProjectionsGrooves2 Push the faceplate in until it clicks.The faceplate is locked in place, allowing you touse the unit.TEL MuteThe audio system automatically mutes when acall comes in.When a call comes in"CALL" is displayed.The audio system pauses.Listening to the audio during a callPress the [SRC] button.The "CALL" display disappears and the audiosystem comes back ON.When the call endsHang up the phone.The "CALL" display disappears and the audiosystem comes back ON.3 Select the Audio Setup item to adjustPress the [VOL] knob.Each time you press the knob, the item to beadjusted alternates between the items shown inthe table below.4 Adjust the Audio setup itemTurn the [VOL] knob.Adjustment Item Display RangeVolume offset "V-OF" –8 — ±0Loudness "LOUD" ON/OFF• Volume offset: Sets each source’s volume as adifference from the basic volume.• Loudness: Compensates for low and high tonesduring low volume.When Loudness is ON, "LOUD" indicatoris ON.5 Exit Audio Setup modePress the [VOL] knob for at least 1 second.