Kenwood KDC-135 Service Manual

Also see for KDC-135: Instruction manual Instruction manual

Contents

Kenwood KDC-135 Service Manual Manual pdf 8 page image

KDC-135/135CR/1368■ ExampleKey Description of display Description5 Disc EJECT times display E J C X X X X X Disc EJECT times display. MAX 65535 (times)■5 While disc EJECT times is displayed, press and hold for2 seconds or longer to clear disc EJECT times.A symbol “■” in the key column indicates that the key should be pressed and held for 1 second or longer.■ How to enter the test modeProcedure NotePress and hold the [1] key and [3] key and reset.All lamps blink when it is detected that the sub-clock resonator is disconnected.When having started up in the test mode, change the LINE MUTE inhibition time from 10 seconds to 1 second.When operating in the test mode, even if a DC offset error occurs, detection information is not written in the E2PROM.Forced disc ejection is prohibited in the test mode.■ How to clear the test modeProcedure NoteReset, momentary power down, ACC OFF, Power OFF, Panel detached. Clearing the test mode■ Test mode default conditionDescription Default valuesSource STANDBYDisplay Display lights are all turned on.Volume -10dB (“30” is displayed.)Bass Boost OFFCRSC OFF regardless of having/not having the switching function.AUX ON (Only model equipped with AUX)System Q NATURAL (FLAT)Beep Sound on with a key pressed regardless of any settings.Preout Sub WooferTEST MODE