Kenwood KDC-138 Instruction Manual

Also see for KDC-138: Training guide Instruction manual Instruction manual Instruction manual Service manual

Contents

Kenwood KDC-138 Instruction Manual Manual pdf 12 page image

12 | KDC-MP238/CR/KDC-MP208/KDC-138/CRMenu OperationFunction of KDC-MP238/KDC-MP238CR/KDC-MP208Auxiliary Input Display SettingSelecting the display when changing to Auxiliaryinput source.1 Select Auxiliary input sourcePress the [SRC] button.Select the “AUX” display.2 Enter Menu modePress the [B.BOOST] button for at least 1second.“MENU” is displayed.3 Select Auxiliary input display setting modePress the top or bottom side of the Controlknob.Select the “NAME SET” display.4 Enter Auxiliary input display setting modePress the center of the Control knob for at least1 second.The presently selected Auxiliary input display isdisplayed.5 Select the Auxiliary input displayPress the right or left side of the Control knob.Each time you push the knob, the display alternatesas listed below.• “AUX”• “DVD”• “PORTABLE”• “GAME”• “VIDEO”• “TV”6 Exit Auxiliary input display setting modePress the [B.BOOST] button.⁄• When operation stops for 10 seconds, the name at thattime is registered, and the Auxiliary input display settingmode closes.• The Auxiliary input display can be set only when thebuilt-in auxiliary input or the auxiliary input of optionalKCA-S220A is used.Function of KDC-MP238Receive mode SettingSetting the receiver mode.1 Select the Receive modePress the top or bottom side of the Controlknob.Select the “HDR MODE” display.2 Enter Receive modePress the center of the Control knob for at least1 second.3 Set the Receive modePress the top or bottom side of the Controlknob.Receive mode Display OperationAuto mode “AUTO” Automatically tunes to analogbroadcast when there is no digitalbroadcast.Digital “DIGITAL” Digital broadcasts only.Analog “ANALOG” Analog broadcasts only.4 Exit Receive modePress the [B.BOOST] button.Function of KDC-MP238/KDC-MP238CR/KDC-MP208Demonstration mode SettingSets the demonstration mode.1 Select the Demonstration modePress the top or bottom side of the Controlknob.Select the “DEMO” display.2 Set the Demonstration modePress the center of the Control knob for at least2 seconds.Each time you press the knob at least 2 seconds,the Demonstration mode alternates between thesettings shown in the table below.Display Setting“DEMO ON” The Demonstration mode function is ON.“DEMO OFF” Exit Demonstration mode (Normal mode).