Kenwood KDC-139 Instruction Manual

Also see for KDC-139: Service manual

Contents

Kenwood KDC-139 Instruction Manual Manual pdf 10 page image

10 | KDC-MP439/KDC-MP3039/KDC-MP339/KDC-MP239/KDC-139Menu OperationMenu SystemSetting various functions.1 Enter Menu modePress the [B.BOOST] button for at least 1second.“MENU”/ “MEnU” is displayed.2 Select the menu itemPress the top or bottom side of the Controlknob.KDC-MP439/MP3039/MP339/MP239Display Setting Setting overview Source“CODE SET” Refer topage 10Sets security code. (Function ofKDC-MP439)“CLK ADJ” Refer topage 11Sets the clock.“DIM” ON/OFF* Adjusts the brightness ofthe display according to thesurrounding illumination.“SWPRE” R*/ SW Sets the preout output.“SPRM” ON*/OFF Turns ON/OFF the Supremefunction.“CRSC” OFF/ON* Switches to Monaural to decreasenoise when reception is poor.“NAME SET” Refer topage 11Sets the display when switchedto AUX source.“SCL” AUTO*/MANUSpecifies whether the text isscrolled automatically.“AUX” OFF/ON1*/ON2Sets whether to display AUXduring source selection.“CD READ” 1*/2 Sets the CD read mode.“DEMO” Refer topage 12Specifies whether to enabledemonstration.KDC-139Display Setting Setting overview Source“CLCK” Refer topage 11Sets the clock.“REAR”/”SUB”REAR*/SUB Sets the preout output.“CRSC” On*/OFF Switches to Monaural to decreasenoise when reception is poor.“AUH” OFF/On* Sets whether to display AUXduring source selection.*Factory setting: Can be set in standby state.: Can be set while Audio file source.: Can be set during FM reception.: Can be set while accessing AUX source.⁄• Refer to the respective page for information on how toset the items with reference page number.• Refer to the (page 14) for the details of themenu items.3 Set the menu itemPress the right or left side of the Control knob.4 Exit Menu modePress the [B.BOOST] button.Function of KDC-MP439Security CodeWhen Security Code is set, possibility of theftis reduced because input of Security Code isprompted to turn on the unit once it is turned off.⁄• When you activate the Security Code function, it cannot bereleased.Note, your Security Code is the 4 digit number entered inyour “Car Audio Passport” in this package.1 Enter StandbyPress the [SRC] button.Select the “STANDBY” display.2 Enter Menu modePress the [B.BOOST] button for at least 1second.When “MENU” is displayed, “CODE SET” is displayed.3 Enter Security Code modePress the center of the Control knob for at least1 second.When “ENTER” is displayed, “CODE” is also displayed.4 Select the digits to enterPress the right or left side of the Control knob.5 Select the Security Code numbersPress the top or bottom side of the Controlknob.6 Repeat steps 4 and 5, and complete theSecurity Code.7 Confirm the Security CodePress the center of the Control knob for at least3 seconds.When “RE-ENTER” is displayed, “CODE” is alsodisplayed.