4 ENGLISHGETTING STARTEDTo set the date7 Turn the volume knob to select [DATE FORMAT], then press the knob.8 Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then pressthe knob.9 Turn the volume knob to select [DATE SET], then press the knob.10 Turn the volume knob to make the settings, then press the knob.Day Month Year or Month Day Year11 Press and hold to exit.To return to the previous setting item, press .Set the initial settings1 Press B SRC repeatedly to enter STANDBY.2 Press the volume knob to enter [FUNCTION].• Pressing AUD enters [AUDIO CONTROL] directly.3 Turn the volume knob to select an item (see the following table), thenpress the knob.4 Repeat step 3 until the desired item is selected or activated.5 Press and hold to exit.To return to the previous setting item, press .Default: [XX][AUDIO CONTROL][SWITCH PREOUT] [REAR]/[SUB-W]: Selects whether rear speakers or a subwoofer areconnected to the line out terminals on the rear (through an externalamplifier). (Page 15)[SP SELECT] [OFF]/5/4/6×9/6/OEM: Selects according to the speaker size (5 inchesor 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimumperformance.3[TUNER SETTING][PRESET TYPE] [NORMAL]: Memorizes one station for each preset button in each band(FM1/FM2/FM3/MW/LW). ; [MIX]: Memorizes one station for each presetbutton, regardless of the selected band.[SYSTEM][KEY BEEP] [ON]: Activates the keypress tone. ; [OFF]: Deactivates.[SOURCE SELECT][BUILT-IN AUX] [ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 8)[P-OFF WAIT] Applicable only when the demonstration mode is turned off.Sets the duration when the unit will automatically turn off (while in standbymode) to save the battery.[20M]: 20 minutes ; [40M]: 40 minutes ; [60M]: 60 minutes ;[– – –]: Cancels[CD READ] [1]: Automatically distinguishes between audio file disc and music CD. ;[2]: Forces to play as a music CD. No sound can be heard if an audio file discis played.[F/W UPDATE][UPDATE SYSTEM][F/W UP xxxx] [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is notactivated). For details on how to update the firmware, visit.[CLOCK][CLOCK DISPLAY] [ON]: The clock time is shown on the display even when the unit is turnedoff. ; [OFF]: Cancels.