4GETTING STARTEDSet the clock1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [SETTINGS], then press the knob.3 Turn the volume knob to select [CLOCK], then press the knob.4 Press the volume knob to select [CLOCK ADJ].5 Turn the volume knob to adjust the hour, then press the knob.6 Turn the volume knob to adjust the minute, then press the knob.Press 4 / ¢ to move between the hour and minute adjustment.7 Press and hold to exit.(or)Press and hold DISP to enter clock adjustment mode directly whilein clock display screen.Then, perform steps 5 and 6 above to set the clock.1Set the initial settings1 Press SRC to enter [STANDBY].2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to select [INITIAL SET], then press the knob.4 Turn the volume knob to make a selection (see the table below), then pressthe knob.5 Press and hold to exit.• To return to the previous hierarchy, press .Default: XXPRESET TYPE NORM: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/MW/ LW). ; MIX: Memorizes one station for each preset button regardless of theselected band.KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.RUSSIAN SET ON: Folder name, file name, song title, artist name, album name are displayed inRussian (if applicable). ; OFF: Cancels.P-OFF WAIT Sets the duration when the unit will automatically turns off (while in standby mode)to save the battery.––– : Cancels ; 20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutesBUILTIN AUX ON: Enables AUX in source selection. ; OFF: Disables. (➜ 7)CD READ 1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to playas a music CD. No sound can be heard if an audio file disc is played.SWITCH PRE REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to theline out terminals on the rear (through an external amplifier).SP SELECT OFF/ 5/4/ 6 * 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches,6×9 inches or 6 inches) or OEM speakers for optimum performance.ACCOFF MODE ACC1: Disables CD ejection and power-on immediately after the ACC switch is turnedoff. ; ACC2: Disables CD ejection and power-on for 30 minutes after the ACC switch isturned off.F/W UPDATEF/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).For details on how to update the firmware, see: www.kenwood.com/cs/ce/2