A red indicator will blink on the unit after the faceplate isremoved, warning potential thieves.Display Setting"DSI ON" LED flashes."DSI OFF" LED OFF.DSI (Disabled System Indicator)1 Select Clock Adjustment modePress the [FM] or [AM] button.Select the "CLK ADJ" display.2 Enter Clock Adjust modePress the [4] or [¢] button for at least 2 seconds.The clock display blinks.3 Adjust the hoursPress the [FM] or [AM] button.Adjust the minutesPress the [4] or [¢] button.4 Exit Clock adjustment modePress the [MENU] button.Manual Clock AdjustmentDisplay Setting"BEEP ON" Beep is heard."BEEP OFF" Beep canceled.Setting the operation check sound (beep sound) ON/OFF.Touch Sensor ToneSetting during operation beep sound etc. functions.The Menu system basic operation method is explained here. Thereference for the Menu items and their setting content is afterthis operation explanation.1 Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.2 Select the menu itemPress the [FM] or [AM] button.Example: When you want to set the beep sound select the"BEEP" display.3 Set the menu itemPress the [4] or [¢] button.Example: When "BEEP" is selected, each time the button ispressed it switches "BEEP ON" or "BEEP OFF". Select 1of them as the setting.You can continue by returning to step 2 and setting other items.4 Exit Menu modePress the [MENU] button.When other items that are applicable to the basic operation methodabove are displayed afterwards their setting content chart isentered. (Normally the uppermost setting in the chart is the originalsetting.)Also, the explanation for items that aren't applicable (Adjustment>etc.) are entered step by step.Menu SystemMenu system— 20 —English