Kenwood KDC-208U Instruction Manual

Also see for KDC-208U: Brochure & specs Instruction manual Installation manual Instruction manual Service manual

Contents

Kenwood KDC-208U Instruction Manual Manual pdf 6 page image

6Item Selectable setting (Preset: *)PRESET TYPE NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ AM).KEY BEEP ON */ OFF: Activates/deactivates the keypress tone.BUILTIN AUX ON1 *: Outputs sound of the connected external component through the car speakers when “AUX” is selectedas the source. ; ON2: Outputs sound from the connected external component when “AUX” is selected as thesource. When you turn on the power, the sound attenuates (to prevent noise when no external component isconnected). Turn the volume knob clockwise to return to the previous volume level. ; OFF: Disables “AUX” insource selection.CD READ 1 *: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. Nosound can be heard if an audio file disc is played.Getting startedCanceling the displaydemonstrationThe display demonstration is always turnedon unless you cancel it.When you turn on the power (or after youreset the unit), the display shows:[CANCEL DEMO] \ [PRESS] \[VOLUME KNOB]1 Press the volume knob.[YES] is selected as the initial setup.2 Press the volume knob again to confirm.[DEMO OFF] appears.If no operation is done for about15 seconds or if you turn the volume knobto select [NO] in step 2, [DEMO MODE]appears and the display demonstrationstarts.Setting the demonstration mode1 Press the volume knob to enter[FUNCTION].2 Turn the volume knob to select[DEMO MODE], then press to enter.3 Turn the volume knob to select [ON] or[OFF].If [ON] is selected, display demonstrationstarts if no operation is done for about20 seconds.4 Hold to finish the procedure.Adjusting the clock1 Press the volume knob to enter[FUNCTION] mode.2 Turn the volume knob to select[SETTINGS], then press to enter.3 Turn the volume knob to select [CLOCK],then press to enter.4 Turn the volume knob to select[CLOCK ADJ], then press to enter.Clock hour flashes on the display.5 Turn the volume knob to adjust thehour, then press to enter minuteadjustment.Clock minutes flashes on the display.6 Turn the volume knob to adjust theminute, then press to confirm.Press 4 / ¢ to move between thehour and minute adjustment.7 Hold to finish the procedure.Initial settings before operations1 Press SRC to enter [STANDBY] mode.2 Press the volume knob to enter[FUNCTION] mode.3 Turn the volume knob to select[INITIAL SET], then press to enter.4 Turn the volume knob to make aselection, then press to confirm.See table below for selection.5 Hold to finish the procedure.