Kenwood KDC-210UI Instruction Manual

Contents

Kenwood KDC-210UI Instruction Manual Manual pdf 16 page image

12DISPLAY SETTINGSDefault: XXDISPLAYCOLOR SELECT (For )Select color for ALL ZONE, ZONE 1 and ZONE 2 separately.1 Select a zone. ( 11)2 Select a color for the selected zone.VARIABLE SCAN/CUSTOM R/G/B/preset colors*To make your own color, select [CUSTOM R/G/B]. The color you havemade will be stored in [CUSTOM R/G/B].1 Press the volume knob to enter the detailed color adjustment.2 Press S / T to select the color (R/G/B) to adjust.3 Turn the volume knob to adjust the level (0 to 9), then press the knob.DIMMER Dim the illumination.ON: Dimmer is turned on. ; OFF: Cancels.DIMMER TIME: Set the dimmer on and off time.1 Turn the volume knob to adjust the [ON] time, then press the knob.2 Turn the volume knob to adjust the [OFF] time, then press the knob.(Default: [ON]: 18:00; [OFF]: 6:00)BRIGHTNESS 1 Select a zone. ( 11)2 0 to 31: Select your preferred brightness level for the selected zone.TEXT SCROLL AUTO/ONCE: Select whether to scroll the display informationautomatically, or scroll only once. ; OFF: Cancels.* Preset colors: RED1/RED2/RED3/PURPLE1/PURPLE2/PURPLE3/PURPLE4/BLUE1/BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1/GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/ORANGE2/ORANGEREDTROUBLESHOOTINGSymptom RemedyGeneralSound cannot be heard. • Adjust the volume to the optimum level.• Check the cords and connections.“MISWIRING CHECK WIRINGTHEN PWR ON” appears.Turn the power off, then check to be sure the terminalsof the speaker wires are insulated properly. Turn thepower on again.“PROTECTING SEND SERVICE”appears.Send the unit to the nearest service center.• Sound cannot be heard.• The unit does not turn on.• Information shown on thedisplay is incorrect.Clean the connectors. ( 14)The unit does not work at all. Reset the unit. ( 3)Radio • Radio reception is poor.• Static noise while listeningto the radio.Connect the antenna firmly.CD/USB/iPodDisc cannot be ejected. Press and hold M to forcibly eject the disc. Be carefulnot to drop the disc when it is ejected. If this does notsolve the problem, reset the unit. ( 3)Noise is generated. Skip to another track or change the disc.Tracks do not play back asyou intended them to play.Playback order is determined when files are recorded.“READING” keeps flashing. Do not use too many hierarchical levels or folders.Elapsed playing time is notcorrect.This is caused by how the tracks are recorded.Correct characters are notdisplayed (e.g. album name).• This unit can only display uppercase letters,numbers, and a limited number of symbols.• Depending on the display language you haveselected ( 5), some characters may not bedisplayed correctly.ENGLISH