Kenwood KDC-252U Instruction Manual

Also see for KDC-202U: Instruction manual Installation instructions Instruction manual Service manual

Contents

Kenwood KDC-252U Instruction Manual Manual pdf 8 page image

Adjusting the clock1 Press the volume knob to enter [FUNCTION] mode.2 Turn the volume knob to select [SETIINGS], then press to enter.3 Turn the volume knob to select [CLOCK], then press to enter.4 Press the volume knob to select [CLOCK ADJUST] I [CLOCK ADJ].Clock hour flashes on the display.5 Turn the volume knob to adjust the hour, then press to enter minute adjustment.Clock minutes flashes on the display.6 Turn the volume knob to adjust the minute, then press to confirm.Press~ I~ to move between the hour and minute adjustment.7 Hold~ to finish the procedure.Initial settings before operations1 Press t!J SRC to enter [STANDBY] mode.2 Press the volume knob to enter [FUNCTION] mode.3 Turn the volume knob to select [INITIAL SET], then press to enter.4 Turn the volume knob to make a selection, then press to confirm.See table below for selection.5 Hold~ to finish the procedure.PRESET TYPE NORMAL/ NORM*: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM).;MIX: Memorizes one station for each preset button regardless of the selected band (FM 1I FM2/ FM3/ AM).KEY BEEP ON*I OFF: Activates/deactivates the keypress tone.BUllT-IN AUX/ ON*: Enables" AUX" in source selection. Sound of the connected external component is produce through theBUllTIN AUX car speakers.; OFF: Disables" AUX" in source selection.CD READ 1*:Automatically distinguishes between audio file disc and music CD.; 2: Forces to play as a music CD. Nosound can be heard if an audio file disc is played.SWITCH PRE For e:otellf118 e:oit1e)11813•II&hillf1111:1•II~hJIJftlll:i&li1~1nl8:REAR*I SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals onthe rear of the unit (through an external amplifier).SP SELECT OFF* I 514/ 6 x 9161 OEM: Selects the speaker size for optimum performance.FIW UP xx.xx YES*: Starts upgrading the firmware.; NO: Cancels (upgrading is not activated).For details on how to update the firmware, see: www.kenwood.com/cs/ce/About 11KENWOOD Music Editor"• This unit supports the PC application "KENWOOD Music Editor Light ver1.1" or later.• When you use the audio file with database information added by the "KENWOOD Music Editor Light ver1.1," you cansearch afile by title, album or artist name using Music Search.• In the Instruction manual, the term "USB device" is used to mean the device that contains audio files with databaseinformation added with KENWOOD Music Editor.• "KENWOOD Music Editor Light ver1.1" is available from the following web site: www.kenwood.com/cs/ce/• For further information on "KENWOOD Music Editor Light ver1.1," refer to the site above or the application help.8