Kenwood KDC-255U Instruction Manual

Contents

15ENGLISH |REMOTE CONTSTEERING WHEELREMOTE INPUTANT CONTP. CONTMUTEMARINEREMOTEFRONTR LREAR/SWR LREAR/SWKDC-155UKDC-255USW FRONT R LREARKDC-355UKDC-X397KDC-MP155UKDC-MP255UKMR-355UWiring connection Part list for installationFuse (10 A)Rear/subwoofer output Rear/subwoofer outputFront output Front outputSubwoofer outputRear outputFor KDC-X397 / KDC-355U / KMR-355U :To the optional SiriusXM Connect Vehicle Tuner (commercially available) (« 8)Antenna terminalCar fuse boxCar fuse boxBatteryIgnition switchBlue/White(Power control wire)Red(Ignition wire)Yellow(Battery wire)Black (Ground wire)To the metallic body orchassis of the carTo the power control terminal when using theoptional power amplifier, or to the antenna controlterminal in the vehicle.For KMR-355U :To Kenwood Wired Marine Remote Control unit(optional accessory)For the latest information on marine accessoriesplease go to: http://www.kenwoodusa.com/Car_Entertainment/Marine/Brown(Mute control wire)Blue(Antenna control wire)WhiteGrayGreenPurpleWhite/BlackGray/BlackGreen/BlackPurple/BlackTo the terminal that is grounded when eitherthe telephone rings or during conversation. (Toconnect the Kenwood navigation system, refer yournavigation manual.)To front speaker (left)To rear speaker (left)To front speaker (right)To rear speaker (right)Light blue/yellow(Steering remote controlwire)Light blue/yellow(Marine remote controlwire)For KDC-X397 / KDC-355U / KDC-MP255U /KDC-MP155U :To the steering wheel remote control adapter(Not used)If no connections are made, do not let the wire come out from the tab.( ×4 )( ×4 )( ×2 )( ×1 )( ×1 )( ×1 )( ×1 )A FaceplateB Mounting sleeveC Trim plateD Wiring harnessE Extraction keyF Flat head screwG Round head screwEN_KDC-X397[KWK0]f.indd 15 8/7/12 2:48:16 PM

/ 18

Related manuals for Kenwood DC-MP255U