Kenwood KDC-262U Instruction Manual

Contents

12DISPLAY SETTINGS1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [DISPLAY], then press theknob.3 Turn the volume knob to make a selection (see the followingtable), then press the knob.4 Repeat step 3 until the desired item is selected/activated orfollow the instructions stated on the selected item.5 Press and hold to exit.To return to the previous setting item, press .Default: XXCOLORSELECT*1VARIABLE SCAN/ CUSTOM R/G/B/ preset colors*2: Selects yourpreferred key and display illumination color.You can create your own color (when [CUSTOM R/G/B] or presetcolors*2 is selected). The color you have created can be stored in[CUSTOM R/G/B].1 Press and hold the volume knob to enter the detailed coloradjustment.2 Press S / T to select the color (R/ G/ B) to adjust.3 Turn the volume knob to adjust the level (0 — 9), then press theknob.DIMMER ON: Dims the display illumination (and button illumination*1). ;OFF: Cancels.BRIGHTNESS 0 — 31: Selects your preferred brightness level for displayillumination (and button illumination*1).TEXT SCROLL AUTO/ ONCE: Selects whether to scroll the display informationautomatically, or scroll only once. ; OFF: Cancels.*1 For / .*2 Preset colors: RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/BLUE1/ BLUE2/ BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/AQUA2/ GREEN1/ GREEN2/ GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/YELLOW/ ORANGE1/ ORANGE2/ ORANGEREDTROUBLESHOOTINGSymptom RemedyGeneralSound cannot be heard. • Adjust the volume to the optimum level.• Check the cords and connections.“MISWIRING CHECK WIRINGTHEN PWR ON” appears.Turn the power off, then check to be sure the terminals of thespeaker wires are insulated properly. Turn the power on again.“PROTECTING SEND SERVICE”appears.Send the unit to the nearest service center.• Sound cannot be heard.• The unit does not turn on.• Information shown on thedisplay is incorrect.Clean the connectors. ( 2)The unit does not work at all. Reset the unit. ( 3)Radio • Radio reception is poor.• Static noise while listeningto the radio.• Connect the antenna firmly.• Pull the antenna out all the way.CD / USB / iPodDisc cannot be ejected. Press and hold M to forcibly eject the disc. Be careful not to dropthe disc when it is ejected. If this does not solve the problem,reset the unit. ( 3)Noise is generated. Skip to another track or change the disc.Tracks do not play back asyou intended them to play.Playback order is determined when files are recorded.“READING” keeps flashing. Do not use too many hierarchical levels or folders.Elapsed playing time is notcorrect.This is caused by how the tracks are recorded.Correct characters are notdisplayed (e.g. album name).This unit can only display uppercase letters, numbers, and alimited number of symbols.“NA FILE” Make sure the disc contains supported audio files. ( 14)“NO DISC” Insert a playable disc into the loading slot.“TOC ERROR” Make sure the disc is clean and inserted properly.“PLEASE EJECT” Reset the unit. If this does not solve the problem, consult yournearest service center.