4GETTING STARTEDCancel the demonstrationWhen you turn on the power (or after you reset the unit), the displayshows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”1 Press the volume knob.[YES] is selected for the initial setup.2 Press the volume knob again.“DEMO OFF” appears.Set the clock1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [CLOCK], then press the knob.3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.4 Turn the volume knob to make the settings, then press the knob.Day Hour Minute5 Turn the volume knob to select [CLOCK FORMAT], then press the knob.6 Turn the volume knob to select [12H] or [24H], then press the knob.7 Press and hold to exit.To return to the previous setting item, press .(For / / / )While in clock display screen...Press and hold to enter clock adjustment mode directly.Then, perform step 4 to set the clock.12Set the initial settings1 Press repeatedly to enter STANDBY.2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to make a selection (see the following table),then press the knob.4 Repeat step 3 until the desired item is selected or activated.5 Press and hold to exit.To return to the previous setting item, press .Default: XXAUDIO CONTROLSWITCHPREOUTREAR/ SUB-W or REAR/ SUBWOOFER: Selects whether rear speakers ora subwoofer are connected to the line out terminals on the rear (throughan external amplifier).SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inchesor 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimumperformance.DISPLAYEASY MENU (For / )ON: Both display and button illumination change to white color whenentering [FUNCTION]. ; OFF: Both display and button illuminationremain as [COLOR SELECT] color. ( 12)TUNER SETTINGPRESET TYPE NORMAL: Memorizes one station for each preset button in each band(FM1/ FM2/ FM3/ AM). ; MIX: Memorizes one station for each presetbutton, regardless of the selected band.3JS_KWD_KDC_262U_KN_EN_05.indd 4 12/7/2014 8:25:33 PM