4GETTING STARTEDSelect the display language and cancel thedemonstrationWhen you turn on the power (or after you reset the unit), the displayshows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB”1 Turn the volume knob to select [ENG] (English) or [SPA] (Spanish),then press the knob.[ENG] is selected for the initial setup.Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUMEKNOB”.2 Press the volume knob.[YES] is selected for the initial setup.3 Press the volume knob again.“DEMO OFF” appears.Set the clock and date1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [CLOCK], then press the knob.To adjust the clock3 Turn the volume knob to select [CLOCK ADJUST], then press theknob.4 Turn the volume knob to make the settings, then press the knob.Hour Minute5 Turn the volume knob to select [CLOCK FORMAT], then press theknob.6 Turn the volume knob to select [12H] or [24H], then press theknob.12To set the date7 Turn the volume knob to select [DATE FORMAT], then press the knob.8 Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then pressthe knob.9 Turn the volume knob to select [DATE SET], then press the knob.10 Turn the volume knob to make the settings, then press the knob.Day Month Year or Month Day Year11 Press and hold to exit.To return to the previous setting item, press .Set the initial settings1 Press repeatedly to enter STANDBY.2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to select an item (see the following table), thenpress the knob.4 Repeat step 3 until the desired item is selected or activated.5 Press and hold to exit.To return to the previous setting item, press .Default: XXAUDIO CONTROLSWITCHPREOUTREAR/ SUB-W or REAR/ SUBWOOFER: Selects whether rear speakers or asubwoofer are connected to the line out terminals on the rear (through anexternal amplifier).SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.DISPLAYEASY MENU (For )ON: Both display and button illumination change to white color whenentering [FUNCTION]. ; OFF: Both display and button illumination remain as[COLOR SELECT] color. ( 13)3JS_KWD_KDC_265U_KN_EN_6.indd 4 27/7/2015 1:26:18 PM