Kenwood KDC-268U Instruction Manual

Contents

Kenwood KDC-268U Instruction Manual Manual pdf 14 page image

14Data Size: B6L (182 mm x 128 mm)Book Size: B6L (182 mm x 128 mm)DISPLAY SETTINGSSet the dimmerPress and hold DISP (DIMMER) to turn on or off the dimmer.• If you have set [DIMMER TIME] ( 15), it will be canceled once you pressand hold this button.Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item ( 15), then press the knob.3 Repeat step 2 until the desired item is selected/activated or followthe instructions stated on the selected item.4 Press and hold to exit.To return to the previous setting item, press .LPF SUBWOOFER THROUGH: All signals are sent to the subwoofer. ;85HZ/120HZ/160HZ: Audio signals with frequencies lower than85 Hz/120 Hz/160 Hz are sent to the subwoofer.SUB-W PHASE REVERSE (180°)/NORMAL (0°): Selects the phase of the subwooferoutput to be in line with the speaker output for optimum performance.(Selectable only if a setting other than [THROUGH] is selected for[LPF SUBWOOFER].)FADER R15 to F15 (0): Adjusts the rear and front speaker output balance.BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance.VOLUME OFFSET For AUX: –8 to +8 (0) ; For other sources: –8 to 0: Preset the initialvolume level of each source. (Before adjustment, select the source youwant to adjust.)SOUND RECNSTR(Soundreconstruction)ON: Creates realistic sound by compensating the high-frequencycomponents and restoring the rise-time of the waveform that are lostin audio data compression. ; OFF: Cancels.• [SUB-W LEVEL]/[SUBWOOFER SET]/[LPF SUBWOOFER]/[SUB-W PHASE] isselectable only if [SWITCH PREOUT] is set to [SUBWOOFER] or [SUB-W]. ( 4)• [SUB-W LEVEL]/[LPF SUBWOOFER]/[SUB-W PHASE] is selectable only if[SUBWOOFER SET] is set to [ON]. ( 13)AUDIO SETTINGSENGLISH(For )(For / /) (For )JS_KWD_KDC_268U_KN_EN_2.indd 14JS_KWD_KDC_268U_KN_EN_2.indd 14 14/6/2016 2:40:11 PM14/6/2016 2:40:11 PM