switch as shown below.4Adjust the Audio itemPress the [4] or [¢] button.Adjustment ItemDisplayRangeBass Center Frequency*"Bass F"60/70/80/100 or 150HzBass level"Bass"/ "BAS"–8 — +8Bass Q Factor*"Bass Q"1.00/1.25/1.50/2.00Bass Extend*"Bass EXT"ON/OFFMiddle Center"MID F"0.5/1.0/1.5/2.0 kHzFrequency*Middle level"Middle"/ "MID"–8 — +8Middle Q Factor*"Middle Q"1.0/2.0Treble Center Frequency* "TRE F"10.0/12.5/15.0/17.5kHzTreble level"Treble"/ "TRE"–8 — +8Balance"Balance"/ "BAL"Left 15 — Right 15Fader"Fader"/ "FAD"Rear 15 — Front 15Non-Fading level**"NF Level"–15 — +15Front High Pass Filter*"HPF F"Through/100/125/170 HzRear High Pass Filter*"HPF R"Through/200 HzFront/Rear High Pass"HPF"Through/100/125/Filter***170 HzNon-Fading"LPF NF"50/80/120/ThroughLow Pass Filter**HzVolume offset"V-Offset"/ "V-OFF" –8 — ±0Loudness"LOUD"ON/OFF• According to the Bass Q Factor setting value, the frequencies thatcan be set in Bass Center Frequency change as shown below.Bass Q FactorBass Center Frequency1.00/1.25/1.5060/70/80/1002.0060/70/80/1501Select the source for adjustmentPress the [SRC] button.2Enter Audio Control modePress the [AUD] button for at least 1 second.3Select the Audio item for adjustmentPress the [FM] or [AM] button.Each time the button is pressed the items that can be adjustedAudio ControlYou can recall the best sound setting preset for different types ofmusic.1Select the source to setPress the [SRC] button.2Select the Sound typePress the [System Q] button.Each time the button is pressed the sound setting switches.Sound settingDisplayFlat"Flat"/ "FLAT"User memory"User"/ "USER"Rock"Rock"/ "ROCK"Pops"Pops"/ "POPS"Easy"Easy"/ "EASY"Top 40"Top40"/ "TOP40"Jazz"Jazz"/ "JAZZ"• User memory: The values set on the • Each setting value is changed with the (page11).First, select the speaker type with the Speaker setting.System QGeneral features— 10 —English