Kenwood KDC-303RG Instruction Manual

Also see for KDC-4080R: Service manual

Kenwood KDC-303RG Instruction Manual Manual pdf 22 page image

You can arrange to have news bulletins interrupt your currentlistening source, including other radio stations. When the NewsBulletin function is on, the PTY News Timeout setting allowsyou to set the interval during which further news interruptioncannot take place. You can adjust the PTY news interruptionperiod from 10 to 90 minutes for each journey.Display and setting:"NEWS OFF/ 00M/ 10M/ 20M/ 30M/ 40M/ 50M/ 60M/ 70M/80M/ 90M" (M= minutes): When you select the news interruption timeout interval, theNews function turns on and the NEWS indicator lights up.When a news bulletin is received, "NEWS" will be displayedand reception will begin at the preset volume.• If you choose the "20M" setting, further news bulletins will notbe received for 20 minutes once the first news bulletin isreceived.• This function is only available if the desired station sends PTY-code for news bulletin or belongs to Network>-Network sending PTY-code for news bulletin.• If you turn on the news bulletin function in the MW/LW band,the band is switched automatically to the FM band.However, the MW/LW band is not returned to when you turn offthe function.NOTENews Bulletin Functionwith PTY News Timeout SettingFunction of the KDC-4080R/KDC-4080RVYou can switch the colour of the button illumination betweengreen and red.Display and setting:"COL GRN": The colour of the illumination is green."COL RED": The colour of the illumination is red.Selectable IlluminationA red indicator blinks on the unit after the faceplate is removed,warning potential thieves. The factory default for this functionis "ON".Display and setting:"DSI ON": The disabled system indicator is on."DSI OFF": The disabled system indicator is off.Disabled System Indicator (DSI)With automatic time adjustment, you can set the clock timeautomatically according to time data sent from RDS stations(after receiving RDS signals for several minutes). You can alsoset the time manually if the automatic time adjustment functionis turned off. The factory default is automatic time adjustment.Display and setting:"SYNC ON": Automatic time adjustment"SYNC OFF": Manual time adjustmentAdjusting Time Automatically:Tune into an RDS station for 3 or 4 minutes.The time adjusts automatically to the correct local time.The time is not adjusted when the RDS station you are tuned to isnot transmitting a time signal. Choose another RDS station insuch a case.NOTEAutomatic Time AdjustmentMenu settings— 22 —English