4PreparationHow to attach/detach the faceplate2112Do not expose the faceplate to directsunlight, excessive heat, or humidity. Alsoavoid places with too much dust or thepossibility of water splashing.Keep the faceplate in its casing whiledetached.The faceplate is a precision piece ofequipment and can be damaged by shocksor jolts.To prevent deterioration, do not touch theterminals of the unit and faceplate withyour fingers.How to reset your unitIf this unit fails to operate properly, press thereset button.The unit returns tofactory settings when thereset button is pressed.Initial settings before operations1 Press SRC to enter [STANDBY] mode.2 Press the volume knob to enter [FUNCTION] mode.3 Turn the volume knob to select [INITIAL SET], then press to enter.4 Turn the volume knob to make a selection, then press to confirm.See table below for selection.5 Hold to finish the procedure.Item Selectable setting (Preset: *)PRESET TYPE NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW). ;MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ MW/ LW).KEY BEEP ON */ OFF: Activates/deactivates the keypress tone.RUSSIAN SET ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;OFF *: Cancels.P-OFF WAIT Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.–––– : Cancels ; 20M *: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutesBUILTIN AUX ON1 *: Outputs sound of the connected external component when “AUX” is selected as the source. ;ON2: Outputs sound from the connected external component when “AUX” is selected as the source. When youturn on the power, the sound attenuates (to prevent noise when no external component is connected). Turnthe volume knob clockwise to return to the previous volume level. ; OFF: Disables “AUX” in source selection.CD READ 1 *: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD.SWITCH PRE REAR */ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on therear of the unit (through an external amplifier).SP SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.[SWITCH PRE] is selectable only with KDC-3051R/ KDC-3051G/ KDC-315A/ KDC-315R/ KDC-3251RY.Reset button