English 5Getting StartedCanceling the displaydemonstrationThe display demonstration is always turnedon unless you cancel it.When you turn on the power (or after youreset the unit), the display shows:[CANCEL DEMO] \ [PRESS] \ [VOLUMEKNOB]1 Press the volume knob.[YES] is selected as the initial setup.2 Press the volume knob again to confirm.[DEMO OFF] appears.■ If no operation is done for about 15 secondsor if you turn the volume knob to select[NO] in step 2, [DEMO MODE] appears andthe display demonstration starts.Setting the demonstration mode1 Press the volume knob to enter[FUNCTION].2 Turn the volume knob to select [DEMOMODE], then press to enter.3 Turn the volume knob to select [ON] or[OFF].If [ON] is selected, display demonstrationstarts if no operation is done for about 20seconds.4 Hold to finish the procedure.Adjusting the clock1 Press the volume knob to enter[FUNCTION] mode.2 Turn the volume knob to select[SETTINGS], then press to enter.3 Turn the volume knob to select [CLOCK],then press to enter.4 Turn the volume knob to select [CLOCKADJUST], then press to enter.Clock hour flashes on the display.5 Turn the volume knob to adjust the hour,then press to enter minute adjustment.Clock minutes flashes on the display.6 Turn the volume knob to adjust theminute, then press to confirm.Press 4 / ¢ to move between thehour and minute adjustment.7 Hold to finish the procedure.Initial settings before operations1 Press SRC to enter [STANDBY] mode.2 Press the volume knob to enter[FUNCTION] mode.3 Turn the volume knob to select [INITIALSET], then press to enter.4 Turn the volume knob to make aselection, then press to confirm.See table below for selection.5 Hold to finish the procedure.Item Selectable setting (Preset: *)PRESET TYPE NORMAL *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ AM) andanother Satellite Radio Tuner.KEY BEEP ON */ OFF: Activates/deactivates the keypress tone.BUILT-IN AUX ON1 *: Outputs sound of the connected external component through the car speakers when “AUX” is selected as thesource. ; ON2: Outputs sound from the connected external component when “AUX” is selected as the source. Whenyou turn on the power, the sound attenuates (to prevent noise when no external component is connected). Turn thevolume knob clockwise to return to the previous volume level. ; OFF: Disables “AUX” in source selection.CD READ 1*: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. No sound canbe heard if an audio file disc is played.SP SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.F/W UP xx.xx YES: Starts upgrading the firmware. ; NO *: Cancels (upgrading is not activated).For details on how to update the firmware, see: www.kenwood.com/cs/ce/